Home |
Search |
Today's Posts |
#8
![]() |
|||
|
|||
![]()
Roy, you are a pessimist.
================================ "Roy Lewallen" wrote in message ... What evidence is there that they've defeated skin effect? If they haven't, the advantage drops to the square root of the DC advantage (e.g., a little more than 3:1 if the DC advantage is 10:1). Also, I wonder if the bulk resistivity of these gadgets remains constant with frequency like solid copper, or rises with frequency like superconductors. If it rises with frequency, then the advantage becomes less yet, potentially even becoming worse than copper at some frequency. Roy Lewallen, W7EL Frank wrote: "Hal Rosser" wrote in message ... "I.Care" wrote in message st.net... NASA is funding a new type of wire that can transmit power 10 times better than normal wire. Will this make a difference in Audio? Does this mean that the resistance per ft for nanotubes is 1/10th that of copper? Are they comparing this performance by weight or by volume of wire ("pound-for-pound", or "cross-sectional-area" ) Then we have to talk about tensile strength of this stuff for supporting its own weight between trees to use as an antenna Then ya gotta conjure up a way to solder the feedline to it. (or make feedline out of it) If the resistance is 1/10th that of copper then it should be possible to manufacture helical inductors with Qs approaching 10,000. Not only that, but open wire transmission lines would have very low loss, therefore making it feasable to feed antennas with very small electrical dimensions. How to handle the votages involved would be something else! Frank |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Is this voltage doubler different? | Homebrew | |||
Two Shortwave Listener (SWL) 10:1 Baluns for Random Wire Antennas | Swap | |||
Newbie SWL question: Antenna geometry | Shortwave | |||
RF filters and Impedance Matching | Homebrew | |||
Question for better antenna mavens than I | Shortwave |