NEW PROGRAM

Program VERTUNE.exe analyses performance of half-wave, end-fed,
vertical and similar antennas. See how power losses are distributed.

A parallel L and C tuned circuit Z-matches the high impedance
feedpoint to a coaxial line. Coil design, (dimensions, wire gauge,
turns) is included.

High radiating efficiency can be acheived with a poor ground electrode
system.

Download VERTUNE (41 kilobytes) in a few seconds, no un-zipping
inconvenience, and run immediately.
----
.................................................. ..........
Regards from Reg, G4FGQ
For Free Radio Design Software go to
http://www.btinternet.com/~g4fgq.regp
.................................................. ..........

Reg:

Well, ya did it, I am downloading that and taking a look--that is right up
the alley of my interest--THANKS!!!! And, that is--ALL JOKING SET ASIDE!

Warmest regards,
John
--
Sit down the six-pack!!! STEP AWAY!!! ...and go do something...

"Reg Edwards" wrote in message
...
| NEW PROGRAM
|
| Program VERTUNE.exe analyses performance of half-wave, end-fed,
| vertical and similar antennas. See how power losses are distributed.
|
| A parallel L and C tuned circuit Z-matches the high impedance
| feedpoint to a coaxial line. Coil design, (dimensions, wire gauge,
| turns) is included.
|
| High radiating efficiency can be acheived with a poor ground electrode
| system.
|
| Download VERTUNE (41 kilobytes) in a few seconds, no un-zipping
| inconvenience, and run immediately.
| ----
| .................................................. .........
| Regards from Reg, G4FGQ
| For Free Radio Design Software go to
| http://www.btinternet.com/~g4fgq.regp
| .................................................. .........
|
|

Reg:

I am a real klutz at times, I can't find it, vertune?--what am I missing?

Warmest regards,
John
--
Sit down the six-pack!!! STEP AWAY!!! ...and go do something...

"Reg Edwards" wrote in message
...
| NEW PROGRAM
|
| Program VERTUNE.exe analyses performance of half-wave, end-fed,
| vertical and similar antennas. See how power losses are distributed.
|
| A parallel L and C tuned circuit Z-matches the high impedance
| feedpoint to a coaxial line. Coil design, (dimensions, wire gauge,
| turns) is included.
|
| High radiating efficiency can be acheived with a poor ground electrode
| system.
|
| Download VERTUNE (41 kilobytes) in a few seconds, no un-zipping
| inconvenience, and run immediately.
| ----
| .................................................. .........
| Regards from Reg, G4FGQ
| For Free Radio Design Software go to
| http://www.btinternet.com/~g4fgq.regp
| .................................................. .........
|
|

John, go to Index.

Then click on "Download progs from here".

Scroll down a long list of program names.

VERTUNE is last name in the list.

Click on the name VERTUNE.

You will then be invited to "Run now" or "Save" to your computer.

After a second or so it usually appears as an icon on your desktop.

Click on the icon and away you go.

I have already received messages from people who have downloaded and
used the program OK. It's quite a complicated procedure to upload it.
It's a relief to know *I* havn't cocked it up as I usually do.
----
Reg, G4FGQ

=================================

"John Smith" wrote -

Reg:

I am a real klutz at times, I can't find it, vertune?--what am I
missing?

Warmest regards,
John
--
Sit down the six-pack!!! STEP AWAY!!! ...and go do something...

Naaa, was never blaming you--I knew it was a fault of mine I could not find
it... on my way now--thanks...

Warmest regards,
John
--
Sit down the six-pack!!! STEP AWAY!!! ...and go do something...

"Reg Edwards" wrote in message
...
| John, go to Index.
|
| Then click on "Download progs from here".
|
| Scroll down a long list of program names.
|
| VERTUNE is last name in the list.
|
| Click on the name VERTUNE.
|
| You will then be invited to "Run now" or "Save" to your computer.
|
| After a second or so it usually appears as an icon on your desktop.
|
| Click on the icon and away you go.
|
| I have already received messages from people who have downloaded and
| used the program OK. It's quite a complicated procedure to upload it.
| It's a relief to know *I* havn't cocked it up as I usually do.
| ----
| Reg, G4FGQ
|
| =================================
|
| "John Smith" wrote -
|
| Reg:
|
| I am a real klutz at times, I can't find it, vertune?--what am I
| missing?
|
| Warmest regards,
| John
| --
| Sit down the six-pack!!! STEP AWAY!!! ...and go do something...
|
|
|

On Thu, 12 May 2005 08:29:57 -0700, "John Smith"
wrote:

I am a real klutz at times, I can't find it, vertune?--what am I missing?

John, just paste his web page URL into your browser. When it comes up
click on the Index and look for the "Download from here" link. You
will find the newer stuff at the end of the list.

Good Luck,



Bob, W9DMK, Dahlgren, VA
Replace "nobody" with my callsign for e-mail
http://www.qsl.net/w9dmk
http://zaffora/f2o.org/W9DMK/W9dmk.html

Go to the download list and you will find it at the bottom.

"John Smith" wrote in message
...
Reg:

I am a real klutz at times, I can't find it, vertune?--what am I missing?

Warmest regards,
John
--
Sit down the six-pack!!! STEP AWAY!!! ...and go do something...

"Reg Edwards" wrote in message
...
| NEW PROGRAM
|
| Program VERTUNE.exe analyses performance of half-wave, end-fed,
| vertical and similar antennas. See how power losses are distributed.
|
| A parallel L and C tuned circuit Z-matches the high impedance
| feedpoint to a coaxial line. Coil design, (dimensions, wire gauge,
| turns) is included.
|
| High radiating efficiency can be acheived with a poor ground electrode
| system.
|
| Download VERTUNE (41 kilobytes) in a few seconds, no un-zipping
| inconvenience, and run immediately.
| ----
| .................................................. .........
| Regards from Reg, G4FGQ
| For Free Radio Design Software go to
| http://www.btinternet.com/~g4fgq.regp
| .................................................. .........
|
|