LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #22   Report Post  
Old May 14th 05, 11:45 PM
Bob Miller
 
Posts: n/a
Default

On Sat, 14 May 2005 08:57:41 +0000 (UTC), "Reg Edwards"
wrote:

You will get all sorts of technical reasons for lower loss. But
essentially -

The wires in high impedance balanced pair lines are thicker than the
inner conductor of coaxial lines.


I get balanced line from the Wireman, and the wire in his 450 ohm line
http://thewireman.com/antennap.html#balanced
is 18, 16 and 14 AWG, depending on which line you choose. Is that
appreciably bigger than coax center conductor wire?

bob
k5qwg



Thicker wires mean lower resistance.

Lower resistance means lower loss.
----
Reg


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
QST Article: An Easy to Build, Dual-Band Collinear Antenna Serge Stroobandt, ON4BAA Antenna 12 October 16th 03 07:44 PM
Length of Coax Affecting Incident Power to Meter? Dr. Slick Antenna 140 August 18th 03 08:17 PM
Variable stub Alfred Lorona Antenna 3 July 30th 03 12:37 AM
50 Ohms "Real Resistive" impedance a Misnomer? Dr. Slick Antenna 255 July 29th 03 11:24 PM
Conservation of Energy Richard Harrison Antenna 34 July 14th 03 11:19 PM


All times are GMT +1. The time now is 10:22 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017