Want RG-11 or similar 75 ohm coax
 

150 ft or more foam dielectric.
Something like 1/2 inch CATV would be ok also.

Doug N4IJ

A run that long deserves twin-lead or ladder-line.
cast away the bindings of the center-conductor world
and come over from the dark side.

"DOUGLAS SNOWDEN" wrote in message
ink.net...
150 ft or more foam dielectric.
Something like 1/2 inch CATV would be ok also.

Doug N4IJ

"DOUGLAS SNOWDEN" wrote in message
ink.net...
150 ft or more foam dielectric.
Something like 1/2 inch CATV would be ok also.

Doug N4IJ

Local CATV outlet will have end of reel lengths of 1/2 and 7/8 hard-line
that should meet your needs. They have to pay to send it to land fills (so
you save them money)

GB

I have seen piles of at a scrape metal yard here... also tons of state
radios and equip... I bought some for just the high power rf transistors
in 'em mrf454's and components... I usually go there for antenna
projects and have noticed this stuff comes in from time to time... also
have picked up some 800 mhz computers there, most worked great... here
they have a $20 minimum purchase--no problem for me grin

Warmest regards,
John
"Justice Gustine" wrote in message
...
"gb" wrote:

"DOUGLAS SNOWDEN" wrote in message
hlink.net...
150 ft or more foam dielectric.
Something like 1/2 inch CATV would be ok also.

Doug N4IJ

Local CATV outlet will have end of reel lengths of 1/2 and 7/8
hard-line
that should meet your needs. They have to pay to send it to land
fills (so
you save them money)

GB

Some sell it to scrap dealers and may not be so generous.


--
"A Sound Mind. A Healthy Body. Pick One" Mr. Hedge