Here is one guy which considers "weaponizing" one, perhaps there is data
there you can use...
http://www.nettwerked.net/EM-HERF_Weapons_p1.txt

There used to be a webpage which showed, in quite some detail, one
hooked up to a hornfeed and used to attack neighbors in a new york
apartment... I can't find it now... the picture detail was excellent
though--had thought of constructing one to goof around with back then...

Warmest regards,
John

"Anchor" wrote in message
news
Any suggestions on how to build a 2.4 GHz CW transmitter with a
microwave
oven magnetron and a 2.4 GHz "pringle" or coffee can style antenna?

There are tons of "pringle" or coffee can antennas or similar on the
web.
For example: http://flakey.info/antenna/waveguide or
http://www.turnpoint.net/wireless/an...coffeecan.html

I suppose one need only insert the magnetron antenna into the coffee
can
where one would normally mount the N-connector feed point.

A labeled diagram of a microwave magnetron can be found at:
http://www.gallawa.com/microtech/mag_test.html

I suppose the metal coffee can has superior micro shielding properties
relative to the aluminumized cardboard pringle can.

Would I be better off with plumbing copper drain pipe from the stray
RF
exposure perspective?

Since microwave magnetron use a half wave power supply, can I use two
magnetrons in the same coffee can powered from a single AC HV
transformer
with a pair of HV rectifiers to feed alternate cycles to the
magnetrons?

Greg, VE0ACR

On Sun, 12 Jun 2005 17:39:36 -0700, John Smith wrote:

Here is one guy which considers "weaponizing" one, perhaps there is data
there you can use...
http://www.nettwerked.net/EM-HERF_Weapons_p1.txt

There used to be a webpage which showed, in quite some detail, one
hooked up to a hornfeed and used to attack neighbors in a new york
apartment... I can't find it now... the picture detail was excellent
though--had thought of constructing one to goof around with back then...

Warmest regards,
John

That web site is a joke, isn't it???