Transmission Line
 

Hi !



I want to put up a 40m dipole antenna and my question is what a
transmission line to use, I have two defferent type of twin lead to
choose from, one is 75 ohm and a TV 300 ohm line. I'm using Yeasu 747
GX and MFJ 949 E for equiment. Thanks



Eric D.

use the one that reaches. don't read any more replies, go do the job, put
up the antenna and get on the air. if you come back here and read all the
messages that this question will generate you will never get on the air!

"Eric Delongchamp" wrote in message
...




Hi !



I want to put up a 40m dipole antenna and my question is what a
transmission line to use, I have two defferent type of twin lead to
choose from, one is 75 ohm and a TV 300 ohm line. I'm using Yeasu 747
GX and MFJ 949 E for equiment. Thanks



Eric D.

Eric Delongchamp wrote:
I want to put up a 40m dipole antenna and my question is what a
transmission line to use, I have two defferent type of twin lead to
choose from, one is 75 ohm and a TV 300 ohm line. I'm using Yeasu 747
GX and MFJ 949 E for equiment. Thanks

Use the 300 ohm line and make it about 62 ft. long,
i.e. 1/2WL.
--
73, Cecil http://www.qsl.net/w5dxp

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

Dave wrote:
use the one that reaches. don't read any more replies, go do the job, put
up the antenna and get on the air. if you come back here and read all the
messages that this question will generate you will never get on the air!

How TRUE !!!!!!!!!!!

I want to put up a 40m dipole antenna and my question is what a
transmission line to use, I have two defferent type of twin lead to
choose from, one is 75 ohm and a TV 300 ohm line. I'm using Yeasu
747
GX and MFJ 949 E for equiment. Thanks

---------------------------------------------------------------
It depends on how you intend to use your antenna and how long will be
the feedline to the shack. You will be concerned mainly with the
inevitable loss in the line.

I assume one of your equipments is a tuner.

If you intend to use only the 40 meter band and the length of line is
not very long then the best choice is the 75 ohm twin line. It makes a
fairly good impedance match with both the antenna and the
tuner/transmitter at that frequency. A choke balun can be fitted
between the line and the tuner.

But if your line is a long one, then the 300 ohm line will probably be
better. It depends on how flimsy it is. Again use a choke balun and a
tuner.

If you intend to work on several bands then the 300 ohm line is a
must. There will be fairly high standing waves on the line at whatever
frequency you are on but losses may not be excessive due to the fairly
high line impedance. With 300 ohms it could be higher.

Ideally, for multiband working and a long line you should have a
substantial 450 ohm ladderline or, best of all, a 600 ohm open wire
line.

But don't neglect the antenna. The best antenna is the highest
possible.
----
Reg, G4FGQ

but - what if the radio is more than 62 ft from the antenna?

"Cecil Moore" wrote in message
...
Eric Delongchamp wrote:
I want to put up a 40m dipole antenna and my question is what a
transmission line to use, I have two defferent type of twin lead to
choose from, one is 75 ohm and a TV 300 ohm line. I'm using Yeasu 747
GX and MFJ 949 E for equiment. Thanks

Use the 300 ohm line and make it about 62 ft. long,
i.e. 1/2WL.
--
73, Cecil http://www.qsl.net/w5dxp

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet
News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption
=----

Then add another 62 feet of transmission line ... etc.

Hal Rosser wrote:

but - what if the radio is more than 62 ft from the antenna?

"Cecil Moore" wrote in message
...

Eric Delongchamp wrote:

I want to put up a 40m dipole antenna and my question is what a
transmission line to use, I have two defferent type of twin lead to
choose from, one is 75 ohm and a TV 300 ohm line. I'm using Yeasu 747
GX and MFJ 949 E for equiment. Thanks

Use the 300 ohm line and make it about 62 ft. long,
i.e. 1/2WL.
--
73, Cecil http://www.qsl.net/w5dxp

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet

News==----

http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+

Newsgroups

----= East and West-Coast Server Farms - Total Privacy via Encryption

=----

Hal Rosser wrote:
but - what if the radio is more than 62 ft from the antenna?

Then naturally you use 124 ft.
--
73, Cecil http://www.qsl.net/w5dxp

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

On Tue, 26 Jul 2005 20:25:50 -0000, "Dave" wrote:

use the one that reaches. don't read any more replies, go do the job, put
up the antenna and get on the air. if you come back here and read all the
messages that this question will generate you will never get on the air!

Yes, remember ignorance is bliss. Follow Dave's advice; even better
though, never ask a question here at all. That way, you can spend more
time on the air and that is more important than possibly learning
something about antennas and transmission lines.

"Wes Stewart" wrote in message
...
On Tue, 26 Jul 2005 20:25:50 -0000, "Dave" wrote:

use the one that reaches. don't read any more replies, go do the job, put
up the antenna and get on the air. if you come back here and read all the
messages that this question will generate you will never get on the air!

Yes, remember ignorance is bliss. Follow Dave's advice; even better
though, never ask a question here at all. That way, you can spend more
time on the air and that is more important than possibly learning
something about antennas and transmission lines.

that of course was not my point... in his case either wire would be fine and
there is no point in discussing which one to use and how to cut it to the
n-th degree as some people do on here.