LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #23   Report Post  
Old August 20th 05, 07:22 PM
 
Posts: n/a
Default

On Fri, 19 Aug 2005 20:21:38 +0000 (UTC), "Reg Edwards"
wrote:

There is a 3-phase transmitter feeding a 3-phase antenna via a 3-wire
transmission line.

The antenna consists of three 1/4-wave horizontal radiators spaced at
120 degee intervals.

Is the radiation pattern in the horizontal plane perfectly
omni-directional?
----
Reg.


No. Effectively you are feeding two legs with a -120 degree phase
and that will make it directional.

For Omnidirectional operation ALL legs will have to be fed in phase.
If the three sources are laggin in phase then the feed system will
have to correct the phase till all are in phase.

Many years ago, there was a CB (USA 27mhz 11m) that used three
vertical dipoles with phasing to get directionality or omnidirectional
gain.


Allison

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Questions -?- Considering a 'small' Shortwave Listener's (SWLs) Antenna RHF Shortwave 1 January 24th 05 09:37 PM
LongWire Antenna Jim B Shortwave 5 March 2nd 04 09:36 AM
Understanding Shortwave Radio Listening and Antenna Design and Construction RHF Shortwave 3 February 13th 04 07:16 AM
Outdoor Antenna and lack of intermod Soliloquy Scanner 11 October 11th 03 01:36 AM


All times are GMT +1. The time now is 11:54 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017