Hi,

I have a Telonic VSWR kit (Model TRB-2) tha is supposed to be good to
2.5GHz. It has 0.5W rating stamped on it , Z1, Z2 , RF in and Detector out.

It came wikth 1:1 and 2 x 2:1 Precision terminators.

I would like to measure VSWR of antennae at 915 MHz using a RF Sig. Gen,
the VSWR kit and a scope. I have a 1GHz spc analyzer also if required.

1. Can I drive this properly with the +13dBm max. from the Sig. Gen and
get reasonable results ?

2. If so, what would be a good setup and test method.

Thanks in advance for any help.

Regards

David