LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #17   Report Post  
Old November 8th 05, 05:34 PM
Tam/WB2TT
 
Posts: n/a
Default MFJ-269 Antenna/SWR/RF Analyzer


"Roy Lewallen" wrote in message
...
Tam/WB2TT wrote:

I will have to try your configuration. I did C - L - C/2 - L -C, with
C=1000PF, L=2.2uH. According to SWCad, the gain is flat above 2 MHz, but
there is 120 degrees phase shift at 4 MHz, relative to the phase at 100
MHz.


The center component should be 2C, or 2000 pF for your experiment, not
C/2. The circuit is simply two pi networks in cascade, each having all
component reactances equal to the "transmission line" Z0. Each pi section
mimics a quarter wave transmission line.

Roy Lewallen, W7EL

Roy,
I wasn't too clear, but I have 2 T networks back/back. That makes the center
cap C/2. I am going to run SWCad on the Pi configuration later, and see what
that does.

Tam/WB2TT


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Spectrum Analyzer vs. Field Strength Analyzer J Autt Homebrew 2 October 7th 04 09:26 PM
practrical spectrum analyzer payam Policy 2 August 27th 03 12:03 AM


All times are GMT +1. The time now is 03:38 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017