Home |
Search |
Today's Posts |
#7
|
|||
|
|||
coax for 900mhz?
"Jim" wrote in message ... thanks guys for your input! ok, forget about thin and supple. i need 50 ohm impedance coax at 900mhz into a uniden scanner(bnc connector) with a 15 foot run. what coax of any size is commonly available that would be suitable? Hi Jim I wonder why you would not use the RG-6 as suggested by Dave Oldridge. Even Home Depot has the cable and the BNCs for it. RG-6 is good transmission line at 900 MHz. I submit that nothing in the system from the antenna all the way to the receiver will be 50 ohms, no matter what transmission line you choose. Jerry |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
A Coax experiment | Shortwave | |||
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Antenna | |||
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Shortwave | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Shortwave |