On Tue, 29 Nov 2005 10:15:37 -0500, Jeff Dieterle wrote:
I'm inside an office inside an old brick and steel factory and can get very
little AM reception, only a few of the stations located in the same city. I
ran RG6-U coax to the roof of the factory (appx.100ft) and considered buying
a loop antenna but at this groups suggestion connected the coax to a long
wire. The stations I'm interested in are Indianapolis 1070kc and Chicago
670kc & 1000kc. I installed 200ft of #12ga insulated wire that is orientated
in line with these 2 cities and .....
^^^^^^^
???????

In-line? The wire should be broadside to the desired path of propagation.


... I can get these stations fine
in the daytime with a reasonable amount of static but at night the static
increases severely. Is there anything else I can do to make this a better
antenna.

You never mention how far away you are from "... Indianapolis 1070kc and
Chicago 670kc & 1000kc." That'll have a LARGE bearing on the day/night
reception question.

Jonesy
--
Marvin L Jones | jonz | W3DHJ | linux
Pueblo, Colorado | @ | Jonesy | OS/2 __
38.24N 104.55W | config.com | DM78rf | SK