Thanks, Irv,

Could you elaberate a liitle bit "make the antenna a ground plane or
vertical and use a piece of copper clad circuit board as the plane" ?
Do you mean to have a piece of copper clad board separete (or inserted
between) the antenna and the other component? Or make the antenna
out of ..... ?
I will read your home pages as well.

Thanks.
Jin

wrote:

Thanks, Irv,

Could you elaberate a liitle bit "make the antenna a ground plane or
vertical and use a piece of copper clad circuit board as the plane" ?
Do you mean to have a piece of copper clad board separete (or inserted
between) the antenna and the other component? Or make the antenna
out of ..... ?
I will read your home pages as well.

Thanks.
Jin

What I suggested is to use the copper separation between the antenna and
the other components where it can act as a shield, and to integrate the copper
as part of the antenna -- i.e. it becomes the ground plane for a vertical element which
is your radiator.

Irv VE6BP
--
--------------------------------------
Diagnosed Type II Diabetes March 5 2001
Beating it with diet and exercise!
297/215/210 (to be revised lower)
58"/43"(!)/44" (already lower too!)
--------------------------------------
Visit my HomePage at http://members.shaw.ca/finkirv/index.html
Visit my Baby Sofia website at http://members.shaw.ca/finkirv4/index.htm
Visit my OLDTIMERS website at http://members.shaw.ca/finkirv5/index.htm
--------------------
Irv Finkleman,
Grampa/Ex-Navy/Old Fart/Ham Radio VE6BP
Calgary, Alberta, Canada