G10 fiberglass rod needed
 

I need about three feet (can be three pieces) of G10 rod about 1 1/2 to 2
inches in diameter. Any suggestions as to a reasonably priced source?
Thanks

G10 fiberglass rod needed
 

Check out this place http://www.mgs4u.com/fiberglass-tube-rod.htm

"Bob" none@thistime wrote in message
...
I need about three feet (can be three pieces) of G10 rod about 1 1/2 to 2
inches in diameter. Any suggestions as to a reasonably priced source?
Thanks

G10 fiberglass rod needed
 

Hi Bob,

I can ge tubing in the size made of PUL500 which is an industrial grade of
Fiberglass, but 20ft must be purchased.

It is expensive. However if you are looking for 1" dia solid that could
arranged as I ourchase it on a regular basis.

73's
Guenther Schweigl
General Manager
Degen Designs
www.degendesigns.com


"Bob" none@thistime wrote in message
...
I need about three feet (can be three pieces) of G10 rod about 1 1/2 to 2
inches in diameter. Any suggestions as to a reasonably priced source?
Thanks

G10 fiberglass rod needed
 

Thank you for your kind offer, I am not in a big hurry, so I will wait until
I can find some short pieces.
"GS" wrote in message
.. .
Hi Bob,

I can ge tubing in the size made of PUL500 which is an industrial grade of
Fiberglass, but 20ft must be purchased.

It is expensive. However if you are looking for 1" dia solid that could
arranged as I ourchase it on a regular basis.

73's
Guenther Schweigl
General Manager
Degen Designs
www.degendesigns.com


"Bob" none@thistime wrote in message
...
I need about three feet (can be three pieces) of G10 rod about 1 1/2 to 2
inches in diameter. Any suggestions as to a reasonably priced source?
Thanks