| Home |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
|
Hello:
Very interesting comments on my question of a few days ago re lightning arrestors. Thank you all for trying to educate me on this subject; really find it confusing. Thread is a bit buried by now, so thought I'd start another one. I fully understand that the best approach is to (also) just disconnect everything. But if not around, here's what I don't understand and concerns me. Assuming a "nearby" strike, and a subsequent emp pulse that's picked up by a receive only antenna wire strung outside: No matter how quickly an arrestor's gas tube fires, and diverts the pulse to a good RF ground, the fact that it takes a few hundred volt threshold to fire makes "any" gas tube type of arrestor almost worthless re the protection of a receiver whose front end certainly won't take a few hundred volts, even for u-seconds, probably. Do you agree with this statement, or am I missing something ? Thanks, Bob |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FYI: NOAA Lightning Safety Awareness Week | Policy | |||
| Antenna Suggestions and Lightning Protection | Shortwave | |||
| Lightning Protection | CB | |||
| lightning protection | Shortwave | |||
| LIGHTNING PROTECTION | Shortwave | |||