| Home |
| Search |
| Today's Posts |
|
#13
February 6th 06, 11:52 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
Verticals versus Horizontal Dipoles
Roy Lewallen wrote:
A step attenuator which is completely adequate for HF and can easily resolve 1 dB can be made from a few cheap slide switches, some PC board material, and a handful of ordinary 5% quarter watt resistors. Detailed instructions can be found in numerous sources, including the Web -- a Google search brought a large number of hits, the first of which was http://www.arrl.org/tis/info/pdf/9506033.pdf. But I'm afraid that this level of homebrewing is beyond the interest if not the ability of the majority of today's amateurs. Got it - Thanks, Roy! - 73 de Mike KB3EIA - |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
| Grounding | Shortwave | |||
| Mostly horizontal polarization of HF arriving at my antenna? | Antenna | |||
| QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna | |||
| efficiency of horizontal vs vertical antennas | Antenna | |||
Threaded Mode
