LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #26   Report Post  
Old February 7th 06, 03:12 AM posted to rec.radio.amateur.antenna
Richard Harrison
 
Posts: n/a
Default Verticals versus Horizontal Dipoles

Reg, G4FGQ wrote:
"The angle of the "horizontal" dipole relative to the horizon, whether
it is an inverted V or not, makes negligible difference to the amount of
noise it collects."

It could be taken to the extreme. Rotated 90-degrees, the horizontal
wire becomes a vertical wire. On its way to becoming a vertical wire, it
is a sloping wire. The sloping wire responds with a vertical component
in addition to its horizontal component. The sum of these components
make up the wire`s total response.

To the best of my knowledge, Reg hit the nail squarely on the head in
the rest of his posting about noise radiation and reception.

Best regards, Richard Harrison, KB5WZI

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inverted ground plane antenna: compared with normal GP and low dipole. Serge Stroobandt, ON4BAA Antenna 8 February 24th 11 10:22 PM
Grounding Steve Rabinowitz Shortwave 31 December 14th 05 05:26 AM
Mostly horizontal polarization of HF arriving at my antenna? Kristinn Andersen, TF3KX Antenna 6 March 15th 05 05:34 AM
QST Article: An Easy to Build, Dual-Band Collinear Antenna Serge Stroobandt, ON4BAA Antenna 12 October 16th 03 07:44 PM
efficiency of horizontal vs vertical antennas Ron Antenna 5 July 23rd 03 03:23 AM


All times are GMT +1. The time now is 08:19 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017