Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
THERE'S the answer I was looking for and it all now makes perfect sense.
Thank you very much John. Jerry -- Jerry Bransford To email, remove 'me' from my email address KC6TAY, PP-ASEL See the Geezer Jeep at http://members.cox.net/jerrypb/ "John Passaneau" wrote in message ... Hi: RG-8 used to be a military specification cable but the military dropped it in favor of a new specification called RG-213. They are very similar coaxes in general, but manufactures are free to make any cable they like and call it RG-8 so the quality and consistency can vary widely. Also RG-8 with foam a center insulator, and all the other variations are not nor never were MilSpec.That does not mean that all RG-8 cables are crap, but it could be and it depends on the manufactures idea of what kind of cable they want to sell. On the other hand RG-213 as a current MilSpec cable is a higher grade cable and is more consistent from manufacture to manufacture. My feeling is that if I'm going to go to all the work of installing a antenna, I want to use the best material I can. So I use RG-213. But my favorite coax is Davis RF Bury Flex, http://www.davisrf.com/ . It's a good coax that has low loss and a very tough jacket. I have 500 feet of it in my antenna system and so far I'm very happy. -- John Passaneau W3JXP State College Pa This mail is a natural product. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects. "Jerry Bransford" wrote in message news:moUAb.29779$Bk1.25134@fed1read05... Ok so I'm getting back active with my ham gear and while looking into a new HF antenna, discovered a new cable type being recommended here and there, RG-213. What is so much better about RG-213 than what I have used so much of over the years, RG-8? TIA. ![]() Jerry -- Jerry Bransford To email, remove 'me' from my email address KC6TAY, PP-ASEL See the Geezer Jeep at http://members.cox.net/jerrypb/ |
#2
![]() |
|||
|
|||
![]()
On Mon, 8 Dec 2003 07:28:21 -0800, "Jerry Bransford"
wrote: THERE'S the answer I was looking for and it all now makes perfect sense. Thank you very much John. Jerry Not to confuse/clarify matters more, but try the coax chart at http://thewireman.com/coaxp.html They have five kinds of rg-8 and four kinds of 213. The rg-8s all show less loss than the 213s. Guess it all depends on who's manufacturing the stuff. Bob k5qwg |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|