RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Antenna (https://www.radiobanter.com/antenna/)
-   -   Connectors (https://www.radiobanter.com/antenna/89097-connectors.html)

Dave Piggin February 21st 06 08:36 PM

Connectors
 
Hi to all.
What's the correct designation for the Female ?


"UHF" feed lines are usually and commonly terminated with a 'N' Type
plugs into a 'N' Type Socket.
"VHF" fed lines are usually and commonly terminated with PL259 plugs
into a SO259 Socket.
The indicator, PL represents a Plug, and SO represents a Socket.

If you think of it in a bodily manner, relate to it as Male= PL and
Female= So, and so a [male enters the female]
Take a look at any "UHF" transceiver and you will find that it's a 'N'
Type socket on the rear entry of the rig, a far superior plug to the
PL253/8/9 Etc Etc Series.

Dual band transceivers are terminated at the rear by a PL259 socket.
Hope this helps. Cheers Dave.

--
Amateur Radio Call Sign M1BTI, Located in Manchester England.
Locator square IO83TK
Chairman Of Trafford Radio Club. Club Call Signs G0TRG & M1BBP
Located at Umist, University Of Manchester Institute For Science And
Technology
Share What You Know, Learn What You Dont.

Steve Nosko February 22nd 06 06:28 PM

Connectors
 


Yup! It's not a "might"... PL-259 (male) mates with the SO-239 (female)
73, K9DCI


"Sal M. Onella" wrote in message
news:GFSKf.127$Uc2.111@fed1read04...

"Dave Piggin" wrote in message
...
Hi to all.
What's the correct designation for the Female ?


"UHF" feed lines are usually and commonly terminated with a 'N' Type
plugs into a 'N' Type Socket.
"VHF" fed lines are usually and commonly terminated with PL259 plugs
into a SO259 Socket.
The indicator, PL represents a Plug, and SO represents a Socket.

If you think of it in a bodily manner, relate to it as Male= PL and
Female= So, and so a [male enters the female]
Take a look at any "UHF" transceiver and you will find that it's a 'N'
Type socket on the rear entry of the rig, a far superior plug to the
PL253/8/9 Etc Etc Series.

Dual band transceivers are terminated at the rear by a PL259 socket.
Hope this helps. Cheers Dave.

--
Amateur Radio Call Sign M1BTI, Located in Manchester England.
Locator square IO83TK
Chairman Of Trafford Radio Club. Club Call Signs G0TRG & M1BBP
Located at Umist, University Of Manchester Institute For Science And
Technology
Share What You Know, Learn What You Dont.


Might not the socket connector be called SO-239? I did a quick "Google"
before sending this.





Dave Piggin February 23rd 06 07:19 AM

Connectors
 
Yup! It's not a "might"... PL-259 (male) mates with the SO-239 (female)
73, K9DCI
Dyslexic fingers!!!! You are correct Sir and I stand corrected. d;-((
Just hope it explained it in plain English to the originator of the
thread. Dave

--
Amateur Radio Call Sign M1BTI, Located in Manchester England.
Locator square IO83TK
Chairman Of Trafford Radio Club. Club Call Signs G0TRG & M1BBP
Located at Umist, University Of Manchester Institute For Science And
Technology
Share What You Know, Learn What You Dont.


All times are GMT +1. The time now is 04:15 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com