LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #3   Report Post  
Old February 27th 06, 06:58 AM posted to rec.radio.amateur.antenna
Roy Lewallen
 
Posts: n/a
Default antenna impedance - calculated 10 - 20 Ohms - measured 36 Ohms??

dansawyeror wrote:
. . .
The question is: What is the basis of the difference between predicted
and measured values?


1. Have you decoupled your feedline? If you're not using a feedline,
have you decoupled your measurement device?

2. Have you substituted a lumped impedance of about 16 + j133 ohms for
the antenna and observed what your measurement equipment indicates?

Roy Lewallen, W7EL
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Passive Repeater Bryan Martin Antenna 13 February 10th 06 02:03 PM
Imax ground plane question Vinnie S. CB 151 April 15th 05 05:21 AM
Putting a Ferrite Rod at the Far-End of a Random Wire Antenna ? RHF Shortwave 22 November 15th 04 08:15 PM
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} RHF Shortwave 23 November 3rd 04 01:38 PM
50 Ohms "Real Resistive" impedance a Misnomer? Dr. Slick Antenna 255 July 29th 03 11:24 PM


All times are GMT +1. The time now is 01:43 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017