Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
Ian White GM3SEK wrote:
The disagreement is entirely about the interpretation - in other words, it's about the theory about standing and travelling waves. Richard habitually misses out this step, which makes it look as if the Bird wattmeter "proves" the physical existence of forward and reverse travelling waves of power. Those are traveling waves of *EM energy* where the power is indicated at a point as the energy flows through that point. Assuming Z0=50 ohms, the Bird indicates the number of joules per second flowing toward the load when the slug is in the forward position. Turning the slug around causes the Bird to indicate the number of joules per second flowing toward the source. The only way to have standing waves of EM energy in a transmission line is to have two EM waves flowing in opposite directions. I have asked you before to explain how standing waves develop without the existence of a forward traveling wave and a rearward traveling wave. Your silence on that subject has been conspicuous by its absence. Do standing waves appear by magic? It doesn't. Everything that you see printed on the Bird's meter scale, and in the Bird literature, represents that company's particular interpretation of theory about waves on transmission lines. The details of that theory are *not* agreed within this newsgroup, which means that - to some people - the two halves of Richard's claim do not join up. Are you asserting that Bird is engaging in false advertising? -- 73, Cecil http://www.qsl.net/w5dxp |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Imax ground plane question | CB | |||
Questions -?- Considering a 'small' Shortwave Listener's (SWLs) Antenna | Shortwave | |||
FS: sma-to-bnc custom fit rubber covered antenna adapter | Scanner | |||
FS: sma-to-bnc custom fit rubber covered antenna adapter | Swap | |||
Current in loading coil, EZNEC - helix | Antenna |