Home |
Search |
Today's Posts |
#10
![]() |
|||
|
|||
![]()
John, what with the unwanted interference from Richard Clark, you'll
just have to accept the fact that the ferrite material has little or no effect on transmission through the short length of transmission line, be it coax or twin-line, wound on the ferrite core. I can only repeat that, insofar as the normal transmission current is concerned, the currents in the pair of wires flow in opposite directions and therefore neutralise each other. No flux is induced in the ferrite. The unwanted longitudinal current flows equally and in the same direction along both wires and therefore comes under the influence of the choke. It is all so beautifully simple! ---- Reg. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
A choke balun is an impedance transformer. | Antenna | |||
How do I test a choke balun? | Antenna | |||
Choke Balun Impedance Recommendations? | Antenna | |||
NEW - Choke Balun Program | Antenna | |||
Antenna Questions | Shortwave |