| Home |
| Search |
| Today's Posts |
|
#7
April 6th 06, 12:34 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
Velocity Factors
Some of the oval 300 ohm line, at least, was filled with PE foam. I
think this was intended to keep the water out. Roy Lewallen, W7EL Reg Edwards wrote: Has anyone ever measured the velocity factor of the twin feeder in which the support for the wires is in the form of a plastic tube? I would guess the VF is quite high. There is no insulation directly between the wires. ---- Reg. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Velocity Factor GT unity | Antenna | |||
| Velocity factor of an insulated antenna wire. | Antenna | |||
| Insulated Wire Velocity Factor: How to . . ?? | Antenna | |||
| End effect, velocity propagation question | Antenna | |||
| Shielded Loop - Velocity Factor? | Antenna | |||
Threaded Mode
