Home |
Search |
Today's Posts |
#12
![]() |
|||
|
|||
![]()
Incoming radiation angles can be obtained by geometric calculation.
Pythagorus and all that, taking earth curvature, height of ionospheric layers, number of hops, etc, etc, into account. Then point your receiving beam into it, if it is adjustable in the vertical plane. Very non-critical. Antenna apperture angles in the vertical plane are extremely broad. The stuff often comes in from more than one angle. Interference between the different paths causes fading and distortion. An antenna will collect from all vertical angles regardles of elevation. ---- Reg =================== "Art Unwin KB9MZ" wrote in message m... Looking for a site or information on incoming radiation angles specifically for 160 metres. 1 How is it measured ? 1a Can it discriminate between vertical and horizontal or what ever polarisation 2 What is the angles per percentage of contacts 3 Are they all horizontally polarised when subject to skip? for distances over say 1000 miles distance One well known DXer (Tom) stated on this newsgroup that a horizontal dipole at 1/2 wave length was inferior to his other antennas, but no specifics given! Appreciate any pointers on the above. Happy New Year Art |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
Measuring radiation resistance | Antenna | |||
RF radiation detector | Antenna | |||
QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna |