| Home |
| Search |
| Today's Posts |
|
#1
September 27th 06, 06:34 PM
posted to rec.radio.amateur.boatanchors
|
|||
|
|||
Dynamotor normal run temperature.
I managed to get a NIB BC-454-B for pretty cheap. I decided to keep it 100% original, so I put a Dynamotor on it and cobbled up a 28VDC supply. Works great as a WWV monitor. I've never run a dynamotor this long before. The question is: What is the proper running temperature for these small dynamotors? Seems quite hot. (Yes, I repacked the bearings). I have another dynamotor, not for the BC-454, that says "50C continuous operation" Is that how hot it gets or is that its expected ambient. TIA. Steve. -- Steven D. Swift, , http://www.novatech-instr.com NOVATECH INSTRUMENTS, INC. P.O. Box 55997 206.301.8986, fax 206.363.4367 Seattle, Washington 98155 USA |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Sky noise temperature - 2m, 70cm, 23cm | Antenna | |||
| FM antenna ambient temperature | Antenna | |||
| FA: PACE high quality digital readout, temperature controlled solder/desoldersolder station | Swap | |||
| The Apollo Hoax FAQ | General | |||
| What's the Temperature out there Burr... ? | Shortwave | |||
Threaded Mode
