310B prototype 710mmfd temp coefficient capacitor needed. W0XO
 

On Wed, 06 Dec 2006 02:21:26 GMT, "Richard Knoppow" wrote:

I had always heard that PTOs would drift if the seal was
broken. Evidently they were filled with dry air. Some at
least have dessicators in them. Evidently low humidity is
important to their operation.

How would that cause drift? Couldn't it just be to prevent
corrosion, especially on the pickups of a roller inductor
inside?

I picked up the NPO caps yesterday, and I'm looking
forward to seeing if the cure the drift.

Dale

310B prototype 710mmfd temp coefficient capacitor needed. W0XO
 

"Dale" wrote in message
...
On Wed, 06 Dec 2006 02:21:26 GMT, "Richard Knoppow"
wrote:

I had always heard that PTOs would drift if the seal
was
broken. Evidently they were filled with dry air. Some at
least have dessicators in them. Evidently low humidity is
important to their operation.

How would that cause drift? Couldn't it just be to prevent
corrosion, especially on the pickups of a roller inductor
inside?

I picked up the NPO caps yesterday, and I'm looking
forward to seeing if the cure the drift.

Dale
I don't know, I never heard an explanation. It might not
even be true. I suppose its possible that moisture could
have some effect on something inside.
Mainly, I thought someone at the Collins site might have
specifications on the components used in the PTO.


--
---
Richard Knoppow
Los Angeles, CA, USA