WANTED: Anyone know what this RF Connector is called?
 

Have this Antenna Matching Device..for which am looking for the proper name
for the RF Connector ?

Am going to Dayton and want to know what is the proper name to use to
describe the connector...or maybe find a Female mating connector?

Thanks for looking.....Norm VE3CZI

http://home.cogeco.ca/~rodemi/images...Switch%20a.jpg

WANTED: Anyone know what this RF Connector is called?
 

In message , Norm VE3CZI
writes
Have this Antenna Matching Device..for which am looking for the proper name
for the RF Connector ?

Am going to Dayton and want to know what is the proper name to use to
describe the connector...or maybe find a Female mating connector?

Thanks for looking.....Norm VE3CZI

http://home.cogeco.ca/~rodemi/images...Switch%20a.jpg



Try a search on "Pye connector". I think it's one of those, eg:
http://www.thevalvepage.com/testeq/t.../1632/1632.htm
--
Ian

WANTED: Anyone know what this RF Connector is called?
 

Norm VE3CZI wrote:
Have this Antenna Matching Device..for which am looking for the proper name
for the RF Connector ?

Am going to Dayton and want to know what is the proper name to use to
describe the connector...or maybe find a Female mating connector?

Thanks for looking.....Norm VE3CZI

http://home.cogeco.ca/~rodemi/images...Switch%20a.jpg



Years ago, I saw some on an early WWII IFF unit. I was told the
connectors were a British type. The mating connector looked all the
world like like a 90 deg, 1/2" pipe fitting. I've never seen one at a
hamfest (including Dayton) or anywhere else for at least 40+ years.
FWIW! de K3HVG

WANTED: Anyone know what this RF Connector is called?
 

"Norm VE3CZI" wrote in message
...
Have this Antenna Matching Device..for which am looking for the proper name
for the RF Connector ?

Am going to Dayton and want to know what is the proper name to use to
describe the connector...or maybe find a Female mating connector?

Thanks for looking.....Norm VE3CZI

http://home.cogeco.ca/~rodemi/images...Switch%20a.jpg

It resembles the connectors for the 2 to 8 mc. "A" set
in the Wireless Set No. 19 (see Google) from WW2. k35454.

WANTED: Anyone know what this RF Connector is called?
 

Tnx to all replies. Seems to be a British connector for sure. Would
replace it with a bulk head SO-239 but don't have much space to manuver...so
will look for an adapter....Not even sure what the thing does...another Ebay
"bargain"
Am off to Dayton Tomorrow AM....will give me another "reason" to wander the
Flea Market ! !
73...Norm VE3CZI



"k35454" wrote in message
...

"Norm VE3CZI" wrote in message
...
Have this Antenna Matching Device..for which am looking for the proper
name
for the RF Connector ?

Am going to Dayton and want to know what is the proper name to use to
describe the connector...or maybe find a Female mating connector?

Thanks for looking.....Norm VE3CZI

http://home.cogeco.ca/~rodemi/images...Switch%20a.jpg

It resembles the connectors for the 2 to 8 mc. "A" set
in the Wireless Set No. 19 (see Google) from WW2. k35454.

WANTED: Anyone know what this RF Connector is called?
 

On Tue, 13 May 2008 15:35:36 -0400, Norm VE3CZI wrote:

Have this Antenna Matching Device..for which am looking for the proper name
for the RF Connector ?

Am going to Dayton and want to know what is the proper name to use to
describe the connector...or maybe find a Female mating connector?

Thanks for looking.....Norm VE3CZI

http://home.cogeco.ca/~rodemi/images...Switch%20a.jpg

Norm,,,How thick is the centre pin and what is the diameter of the smooth
inside of the hexagon nut piece?
Eskay.

WANTED: Anyone know what this RF Connector is called?
 

On May 14, 6:18*pm, Eskay wrote:
On Tue, 13 May 2008 15:35:36 -0400, Norm VE3CZI wrote:
Have this Antenna Matching Device..for which *am looking for the proper name
for the RF Connector ?

Am going to Dayton and want to know what is the proper name to use to
describe the connector...or maybe find a Female mating connector?

Thanks for looking.....Norm VE3CZI

http://home.cogeco.ca/~rodemi/images...Switch%20a.jpg

Norm,,,How thick is the centre pin and what is the diameter of the smooth
inside of the hexagon nut piece?
* * * * * Eskay.

Norm: 90% sure it is a British PYE connector. Used for example on
those Type 19 Sets, many of which were manufactured in North America
and shipped under Lend-Lease to Britain and Russia. Also on some
airborne equipment as mentioned.
I may have a long unused right-angle female that fits your male
connector, somewhere.
Will go and look for it pronto, cos unlikely will ever have use for it
now.
If cannot find find would it not be possible to fit a 239 that has not
the square four bolt pattern but one that is bulkhead mounted with a
single nut.
Another alternative might be a single hole mounting BNC?
If when I find that connector I'll scan and email pix to you.
Any help? Pls advise.
Terry

WANTED: Anyone know what this RF Connector is called?
 

In message , Norm VE3CZI
writes
Have this Antenna Matching Device..for which am looking for the proper name
for the RF Connector ?

Am going to Dayton and want to know what is the proper name to use to
describe the connector...or maybe find a Female mating connector?

Thanks for looking.....Norm VE3CZI

http://home.cogeco.ca/~rodemi/images...Switch%20a.jpg




Hi Norm,
I'm sure that you do but, check your email. I've just sent you a
couple of web sources of these.
--
Bill
G8IAY

WANTED: Anyone know what this RF Connector is called?
 

On Wed, 14 May 2008 14:04:15 -0700 (PDT), terryS wrote:

On May 14, 6:18*pm, Eskay wrote:
On Tue, 13 May 2008 15:35:36 -0400, Norm VE3CZI wrote:
Have this Antenna Matching Device..for which *am looking for the proper name
for the RF Connector ?

Am going to Dayton and want to know what is the proper name to use to
describe the connector...or maybe find a Female mating connector?

Thanks for looking.....Norm VE3CZI

http://home.cogeco.ca/~rodemi/images...Switch%20a.jpg

Norm,,,How thick is the centre pin and what is the diameter of the smooth
inside of the hexagon nut piece?
* * * * * Eskay.

Norm: 90% sure it is a British PYE connector. Used for example on
those Type 19 Sets, many of which were manufactured in North America
and shipped under Lend-Lease to Britain and Russia. Also on some
airborne equipment as mentioned.
I may have a long unused right-angle female that fits your male
connector, somewhere.
Will go and look for it pronto, cos unlikely will ever have use for it
now.
If cannot find find would it not be possible to fit a 239 that has not
the square four bolt pattern but one that is bulkhead mounted with a
single nut.
Another alternative might be a single hole mounting BNC?
If when I find that connector I'll scan and email pix to you.
Any help? Pls advise.
Terry

I'm pretty sure the one I have here is what Norm is looking for.
Eskay

WANTED: Anyone know what this RF Connector is called?
 

On May 13, 5:35*pm, "Norm VE3CZI" wrote:
Have this Antenna Matching Device..for which *am looking for the proper name
for the RF Connector ?

Well, well thought I could put my hand right on it!!!!!!
But no PYE plug connector. Sorry.
Looks like someone in UK has a lead on availability however.
Regards. Terry in VO1xxx land.

WANTED: Anyone know what this RF Connector is called?
 

In article ,
"Norm VE3CZI" wrote:

http://home.cogeco.ca/~rodemi/images...Switch%20a.jpg

Definitely a Pye connector. Standard UK/commonwealth WW2 to 1950s
radio/radar connector. (Developed by W.G. Pye (Cambridge) Ltd, which is
how it came to be called that.

They are all the same size, but can have diffeent insulation for the
centre pin according to the frequency in use. (Perspex/plexiglas for
VHF or Tufnol/SRBF for HF are the usual variations, with SRBP/SRBF
and polyethylene for the cable-mounted "socket" portion. Chassis
connectors (male) are usially nickel-plated brass, cable connectors
(female) are usually mazak (diecast metal) though I have seen brass
ones occasionally. The cable adapter section is plated brass and comes
in a variety of sizes to accomodate anything from Uniradio No.1 through
to RG-58 diameters.

There are also barrel couplers (male-male), Tees (all male), a cable-fitting
"Tee" (male-female) and a male to PL-259 adapter used with some sort of
radar test set and silver plated!

I have some spare cable connectors, so if you're still "stuck" after
the weekend, let me know what you'd like and I'll mail one out if I've
got a spare.

Best,
Chris.

--
The strength of the antispammer movement is that there is no organization.
Nobody can make deals, nobody has the authority to surrender. All people
with pretensions of "leadership" do is make it look like a small bunch
of people with no life. It's a *big* bunch of people with no life.
- Paul Vader in news.admin.net-abuse.email

WANTED: Anyone know what this RF Connector is called?
 

Norm VE3CZI wrote:
Have this Antenna Matching Device..for which am looking for the proper name
for the RF Connector ?

Am going to Dayton and want to know what is the proper name to use to
describe the connector...or maybe find a Female mating connector?

Thanks for looking.....Norm VE3CZI

http://home.cogeco.ca/~rodemi/images...Switch%20a.jpg



Looks like Fair Radio has them on their site.