| Home |
| Search |
| Today's Posts |
|
|
|
#1
August 10th 08, 02:42 AM
posted to rec.radio.amateur.boatanchors
|
|||
|
|||
Source for very small rub-on lettering?
"Dale Parfitt" wrote in message news:Ayrnk.525$ZV1.39@trnddc07... I have had excellent results using my CAD program to generate the artwork and then printing to water slip decal paper. The substrate of the resultant decal is very thin and thus edges virtually unnoticeable. Small Parts also sells a liquid that can be applied to make the substrate disappear entirely ( I have not tried this).. http://www.decalpaper.com/default.asp Dale W4OP Dale, what do you use for a printer? Peter k1zjh |
|
#2
August 10th 08, 03:58 AM
posted to rec.radio.amateur.boatanchors
|
|||
|
|||
|
Source for very small rub-on lettering?
"Tio Pedro" wrote in message ... "Dale Parfitt" wrote in message news:Ayrnk.525$ZV1.39@trnddc07... I have had excellent results using my CAD program to generate the artwork and then printing to water slip decal paper. The substrate of the resultant decal is very thin and thus edges virtually unnoticeable. Small Parts also sells a liquid that can be applied to make the substrate disappear entirely ( I have not tried this).. http://www.decalpaper.com/default.asp Dale W4OP Dale, what do you use for a printer? Peter k1zjh I have the paper in laser jet and ink jet. The laser is an HP1200 and the inkjet is an HP1600 Dale W4OP |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| good source to buy very small tin boxes/containers? | Homebrew | |||
| Source of SO-239 | Antenna | |||
| Re-lettering radio faceplate | Shortwave | |||
| source for small end insulator | Antenna | |||
| SWR will change with Source Z if you measure AT the Source | Antenna | |||
Hybrid Mode
