| Home |
| Search |
| Today's Posts |
|
#2
November 11th 08, 01:46 PM
posted to rec.radio.amateur.boatanchors
|
|||
|
|||
International Crystal Mfg. - FCV2 - Receiver Frequency Converter
Bruce & Judy wrote:
I am looking for the schematic and (hopefully) the assembly instructions for a frequency converter (6m? or 2m?) kit Model FCV-2 that was sold by International Crystal Mfg. Co. of Oklahoma City. It uses two tubes. I have the kit (NIB) and all the parts - but I don't have the schematic or the instructions. Help? Anyone. Thanks, Bruce KB0PZD Contact ICM! They still have instruction sheets on some of the modules they sold in the 1980s.... I would not be surprised if they didn't have instruction sheets on the earlier ones as well. What is the front end tube used on this one? --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| WTB: Frequency Down Converter - 2.4GHZ to 1.0GHz | Homebrew | |||
| Very Low Frequency Up Converter | Shortwave | |||
| fa- SONY FRQ-80 FREQUENCY CONVERTER for PRO-80 NR@$10 | Swap | |||
| fa- SONY FRQ-80 FREQUENCY CONVERTER for PRO-80 NR@$10 | Equipment | |||
| fa- SONY FRQ-80 FREQUENCY CONVERTER for PRO-80 NR@$10 | Equipment | |||
Threaded Mode
