|
It's a 9-pin plug you seek, not an 8-pin. They're mighty hard to find. Here
is a link to a surplus store that may carry them. I've found a few oddball parts here over the years: http://www.montagar.com/~patj/nortex.htm 73 and good luck! Dean K5DH In article , says... Urgently need the 8 prong plug that goes in the back of a Johnson Ranger II. If you have one of these, PLEASE email me at and I wil l happily buy it from you. Last item needed in restoration. Thank you! |
No Spam No wrote:
On Fri, 7 Jan 2005 02:32:52 UTC, (Dick) wrote: Urgently need the 8 prong plug that goes in the back of a Johnson Ranger II. If you have one of these, PLEASE email me at and I will happily buy it from you. Last item needed in restoration. Thank you! Is that the common "octal" plug? They're available as is the "Loctal", which is what I've heard people call the 11 pin octal plug. No, it's a 9-pin plug with slightly smaller pins than the octal. Those used to be very common for audio transformers, and Amphenol made them. I bet that the guys making the old Amphenol octal plugs might still make them, even. It's worth checking the Newark catalogue. Loctal is a very different thing, with eight pins that are all thinner than octal pins, and a locking clip in the center. Aside from being used for tubes, it is very popular for projection lamps. --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
"No Spam " No wrote in message
news:ifgU75G3LLdo-pn2-Tq9LOdYYgdvU@localhost... On Fri, 7 Jan 2005 02:32:52 UTC, (Dick) wrote: Urgently need the 8 prong plug that goes in the back of a Johnson Ranger II. If you have one of these, PLEASE email me at and I will happily buy it from you. Last item needed in restoration. Thank you! Is that the common "octal" plug? They're available as is the "Loctal", which is what I've heard people call the 11 pin octal plug. Reminds me, I should get a few of each and also make up wiring harnesses for the Heathkit SB-102 and HP-23. de ah6gi/4 Correct it is the 8-pin Octal (Amphenol/WPI series 86) VERY COMMON and still being mfg. gb |
"Scott Dorsey" wrote in message ... No Spam No wrote: On Fri, 7 Jan 2005 02:32:52 UTC, (Dick) wrote: Urgently need the 8 prong plug that goes in the back of a Johnson Ranger II. If you have one of these, PLEASE email me at and I will happily buy it from you. Last item needed in restoration. Thank you! Is that the common "octal" plug? They're available as is the "Loctal", which is what I've heard people call the 11 pin octal plug. No, it's a 9-pin plug with slightly smaller pins than the octal. Those used to be very common for audio transformers, and Amphenol made them. I bet that the guys making the old Amphenol octal plugs might still make them, even. It's worth checking the Newark catalogue. No its an 8-pin octal and was also still used for plug-in relays. Here is their catalog (look at Section 4 for digrams and options for 86 series plugs and sockets) http://www.wpi-interconnect.com/Cata...alog%20PDF.pdf gb |
"=K=5=D=H=" wrote in message
... It's a 9-pin plug you seek, not an 8-pin. They're mighty hard to find. Here is a link to a surplus store that may carry them. I've found a few oddball parts here over the years: http://www.montagar.com/~patj/nortex.htm 73 and good luck! Dean K5DH No, its an 8-pin. The 86 series has an alignment keyway in the center (which is not energized - and does not count as a pin). Readily available, being mfg. everyday in Salem, NJ. Here is WPI catalog (look at Section 4 for diagrams and options for 86 series plugs and sockets) http://www.wpi-interconnect.com/Cata...alog%20PDF.pdf |
The Heathkit power cables use 11-pin connectors.
regards, Mahlon - K4OQ No Spam wrote: On Fri, 7 Jan 2005 02:32:52 UTC, (Dick) wrote: Urgently need the 8 prong plug that goes in the back of a Johnson Ranger II. If you have one of these, PLEASE email me at and I will happily buy it from you. Last item needed in restoration. Thank you! Is that the common "octal" plug? They're available as is the "Loctal", which is what I've heard people call the 11 pin octal plug. Reminds me, I should get a few of each and also make up wiring harnesses for the Heathkit SB-102 and HP-23. de ah6gi/4 |
"Lonnie" wrote in message
news:nUGDd.16010$c%.13398@okepread05... The Heathkit power cables use 11-pin connectors. regards, Mahlon - K4OQ Yes, Amphenol 86 series. http://store.yahoo.com/triodeel/amphenol.html 11 pin was used by relays and for power supplies, such as the Heathkit HP-23 for the SB series of radios. 6 pin socket & plugs are the ones normally used with older Leslie speakers (like 147 & 122) with tube amplifiers, that attach to Hammond organs. 8-pin was the popular octal used for a number of subassemblies, relay sockets and cables. |
In article nUGDd.16010$c%.13398@okepread05, Lonnie
writes: The Heathkit power cables use 11-pin connectors. So does the Collins KWM-2. 73--Mike K. Oscar loves trash, but hates Spam! Delete him to reply to me. |
| All times are GMT +1. The time now is 02:00 PM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com