QRZ Forums - "Boat Anchor" & Classic Equipment for Wednesday 14 February 2018
"Boat Anchor" & Classic Equipment
Vacuum tubes under fire?
Posted: 14 Feb 2018 08:24 AM PST
I just found this video on shipping vacuum tubes, any thoughts?
Adjusting Hallicrafters SX-85 Main Dial and Band Spread Position
Posted: 14 Feb 2018 08:16 AM PST
I just received a Hallicrafters SX-85 that I won in an auction. The Main
Dial and Band Spread Dial are not in the home position when I turn the
dials all the way to the left or right.
Is it necessary to restring them to get them correct or is it possible to
carefully force the dial into the proper position to match the capacitors
Hallicrafters S-120 hum
Posted: 14 Feb 2018 08:00 AM PST
It has a hum, I substituted capacitors for all the filter capacitors,
replaced the diode. Still hums. The schematic I have found has differences,
for example the 1000 ohm resistor is marked 500 ohms and I measured 20 ohms
across it, resistors I have never found to go down. The 50C5 shows no pins
3 and 4 on the schematic but there are components connected to it. Ideas?
View attachment 435077
|All times are GMT +1. The time now is 11:13 AM.|
Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.