SWAN 117C Power Supply info needed
 

Question for those of you who are pretty familiar with this unit or have a
schematic/manual.. I have a reprint of sorts.

I'm working on one here for someone.. The schematic I have shows C5 to be a
100uF 25 WV Elec. Cap.
What I'm finding in this unit is a 250uF 25 WV Elec. Cap. and it looks as it
was installed when unit was made, not as part of a repair.

Was there a factory upgrade made to this unit for this to occur? OR a
misprint in the schematic with a parts list addendum that I don't have? Can
anyone enlighten me on this? All the info I have here says nothing of a
change of value.

Please e-mail me direct, to

My news groups replies and posts are delayed for some reason.

Thanks,

C.L.

My schematic shows it to be 250uF @ 25V. But seriously, all it powers
is a couple of 12v dc relay coils. If it is too small, they will hum.

-Chuck, WA3UQV

SPAM HATER wrote:
Question for those of you who are pretty familiar with this unit or have a
schematic/manual.. I have a reprint of sorts.

I'm working on one here for someone.. The schematic I have shows C5 to be a
100uF 25 WV Elec. Cap.
What I'm finding in this unit is a 250uF 25 WV Elec. Cap. and it looks as it
was installed when unit was made, not as part of a repair.

Was there a factory upgrade made to this unit for this to occur? OR a
misprint in the schematic with a parts list addendum that I don't have? Can
anyone enlighten me on this? All the info I have here says nothing of a
change of value.

Please e-mail me direct, to

My news groups replies and posts are delayed for some reason.

Thanks,

C.L.