Johnson Viking I
Ok here goes, I have a Johnson Vilike I and it was working then I was on the
air talking and it was my turn to XMIT so I flipped the Plate switch up and fire shot out of it and it blew the fuse, I replaced the fuse and the switch and it was working again....The next day I turned it on and all tubes came on so after wating a couple of min I flipped the plat up to TX and I noticed the coax relay switch did not switch... so I tried it again and again but the relay is not working now, I pluged the relay into the wall socket and it works fine so it is good. Not being a very good tec. I need somnem help with this. I checked the plug coming out of the back that the relay plugs into and I have 110 volts from both terminals....that is puting the ground lead to the case and checking both sides of the plug is this correct or should I only get 110 volts from one side of this plug like the house current is ? What should I look for in this problem ? I do have the schmatic. 73 Wayne AA5JJ --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.525 / Virus Database: 322 - Release Date: 10/9/03 |
All times are GMT +1. The time now is 08:36 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com