Ft-101
 

I need to order a new heterodyne oscillator crystal for the 28.5-29.0 mhz
portion of the 10 meter band. Peterson crystal needs to know if it's a
series or 20pf crystal. I have no idea. Can anyone help with this?
WY3D.





.................................................. ...............
Posted via TITANnews - Uncensored Newsgroups Access
at http://www.TitanNews.com
-=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-

Frank Mayer wrote:

I need to order a new heterodyne oscillator crystal for the 28.5-29.0 mhz
portion of the 10 meter band. Peterson crystal needs to know if it's a
series or 20pf crystal. I have no idea. Can anyone help with this?
WY3D.

Do you have the schematic? If you do, scan the oscillator circuit at
300 DPI. Crop out everything else, and convert it to a B&W GIF or JPEG
file so it is a small file, and e-mail it to them.

--
Merry Christmas!

Take care, and God bless.
Michael A. Terrell
Central Florida

34.520 MHz, 20 pF load, 45 ohms series resistance

SAM wrote:
34.520 MHz, 20 pF load, 45 ohms series resistance

I don't know where all the 10m xtals went after the FT-101 and Tempo One
became "CB" radios but I suspect that your 'local' CB shop may still
have an unemptied trash kit that may provide the missing xtals.
A six-pack or carpet square should be a fair trade.
:-) Don't ask how I know this. :-0)

-Bill

hehe.. I bet you are absolutley right Bill!! I just noticed this the other
day when I tried to tune in 29.0 0n the 10B band position and couldn't do
it..
Frank

"- - Bill - -" exray@coquidotnet wrote in message
...
SAM wrote:
34.520 MHz, 20 pF load, 45 ohms series resistance

I don't know where all the 10m xtals went after the FT-101 and Tempo One
became "CB" radios but I suspect that your 'local' CB shop may still
have an unemptied trash kit that may provide the missing xtals.
A six-pack or carpet square should be a fair trade.
:-) Don't ask how I know this. :-0)

-Bill






.................................................. ...............
Posted via TITANnews - Uncensored Newsgroups Access
at http://www.TitanNews.com
-=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-

That's probably true, however the 11 meter xtal went in the 11 meter slot
and you didn't have to remove the 10A unless you wanted to freeband above
27.500. I've seen these xtals on eBay for as little as $5, so you may want
to check there.

BTW Bill, are you on the air at all now?

73,

SAM (Scott M)

"- - Bill - -" exray@coquidotnet wrote in message
...
SAM wrote:
34.520 MHz, 20 pF load, 45 ohms series resistance

I don't know where all the 10m xtals went after the FT-101 and Tempo One
became "CB" radios but I suspect that your 'local' CB shop may still
have an unemptied trash kit that may provide the missing xtals.
A six-pack or carpet square should be a fair trade.
:-) Don't ask how I know this. :-0)

-Bill





-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Scottm wrote:

BTW Bill, are you on the air at all now?

73,

SAM (Scott M)

Not on any regular basis. 40m CW only.

-Bill

THIS MAY SEEM SO SIMPLE BUT. . .HAVE YOU CHECKED THE MANUAL BILL T.



PLEASE EXCUSE CAPS, SHORT REPLIES, STROKE

Bill Turner, WA0ABI, 1117 Pike St., Saint Charles,MO 63301. Phone
636-949-2210

Plastic Dial covers, any size, any shape. $14.00
Glass Dial covers, 2" to 8 7/8" x 1/16" incr, $14.00

ELECTROLYTIC CAPACITORS, new, 7/8"DIA. X 3" OR 3 1/4" long, shiney red
or blue cover, brown end seal, printed inscription down the length,
metal mounting strap with a hole for mounting.
33uF-47uF 160 volts, $2.50
33 uF-33uF-33uF 160 volts $3.00
47 uF-47uF-47uF 160 volts $3.50
33uF -47uF 160 volts 47uF/100 $4.00 with bias cap.
33uF-47uF 94 uF/100 volts $4.00 (AC/DCbattery sets) 22uF-22uF 450 volts
$4.00 (for AC sets) 22uF-22uF-22uF 450 volts $4.50 (for AC sets
10 uF 900 volts $6.00
HALLICRAFTERS S-38, A, B, C, D, E, $10.00
ZENITH T/O (can type) all except 7G605 $15.00 .
ALL POSTAGE PAID,cashr, check, money order

For a business SASE a copy of the Pocket Resouce Guide and my personal
four page catalog of pieces, parts, and manuals.