Home |
Search |
Today's Posts |
#6
![]() |
|||
|
|||
![]()
Henry
Sound like your reader needs to be clean. Did you stored the Tester with the reader closed, with out the shipping card in? Have you looked at this http://www.spiritone.com/~nabil/hickok/ Try testing a simple tube like a 5Y3. would you like to trade one. Jimmie Henry Kolesnik wrote in message ... Hi Both my Hickok Cardmatics, KS-15874-L2 have been mothballed for about 10 years and both exhibit the same symptoms as well as both Cal. Cells are dead (I've seen the reverse engineered schematic and wonder if anyone has had success with repair or an external bypass.) I brought both up on a Variac, no smoke and both draw a little over a 1/2 amp. Cal. B+ indicates the meters are OK . For example neither will test a known good 12AX7, the meter tries to go a little backward on Gm, and the 4 button lamp lights indicating a dual section tube. Does anything come to mind of where I should start or am I facing cleaning off the test bench and staring at hours of learning the circuits for basic troubleshooting each mechanical and electronic section? I kind of feel that there's a common fault that someone with lots of experience might point out. tnx & 73 hank wd5jfr --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.512 / Virus Database: 309 - Release Date: 8/20/03 |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FA: Hickok 752A Tube Tester | Boatanchors |