Hello;

I have the above set, unfortunately, the center coil in the 2.7-6.4
range has a broken wire and I cannot repair it. This is the "1st
detector coil" in the manual. There is a large coil about 3/4" in
diameter; in the bottom of this coil form is a screw that attachs the
coil form to the sliding assembly. This screw goes thru a smaller
coil form with very small wire, almost hair-like. This coil has one
end of wire broken off flush with coil of wire -- impossible to even
find the end under magnification.

So, I am looking for either a replacement from a junker, a complete
sliding assembly with all the parts intact or a junker set. Can
anyone help?

Jim