Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old April 16th 05, 01:21 AM
Cmd Buzz Corey
 
Posts: n/a
Default

G. Doughty wrote:
Also, do get an ALC reading of 60ma during the IP tune.


"G. Doughty" wrote in message
news:tgO7e.4621$Z73.893@lakeread04...

Hello,

Just got a ts 520 supposedly in decent condition. Receive is fine,
however, when I go to tune the transmit side, plate and load tuning, there
is absolutely no meter deflection. Nothing. I have the SP switch in the
back in the up position but nothing. Any suggestions?

Greg
Ki4bbl AT cox DOT net




Got the heater switch for the finals on? Make sure the jumper is in
place on the back connector that supplies screen voltage to the finals.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +1. The time now is 05:23 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017