VIKING SHUNTS
 

Looking for some # 32 enamel wire. Only need 6 feet of it to replace the
plate and modulator shunts. Tom

"K6XD TOM" wrote in message
. ..
Looking for some # 32 enamel wire. Only need 6 feet of it to replace the
plate and modulator shunts. Tom

I have plenty of both #30 and #36 I'd be happy to share. (Dual #36 makes
#33)....Also have 28,27,26,25,24 etc.

W4ZCB

suggest you look into buying commercial low uh rf chokes
will do the task.
al

"K6XD TOM" wrote in message
. ..
Looking for some # 32 enamel wire. Only need 6 feet of it to replace the
plate and modulator shunts. Tom

Years ago, I needed a number of shunts. I found that paper clips worked
well . They are higher resistance than copper wire. It was written up in
QST and appeared in the 13th edition of Hints and Kinks.

My paper clips were .025 ohms per clip.

73, Colin K7FM

Thanks Harold but I discovered #32 is to small for the plate shunt and I
had to go to #28 which I had. Tom K6XD

"K6XD TOM" wrote in message
. ..
Thanks Harold but I discovered #32 is to small for the plate shunt and I
had to go to #28 which I had. Tom K6XD

Glad you have it fixed Tom.

Regards
W4ZCB