Collins filters $$$$$$$$$$
 

Why are they so expensive? I've put off buying some for my Collins rig
because of the price.


--

Regards
B.H.

Brian's Basement
http://webpages.charter.net/brianhill/6.htm

Brian's Radio Universe
http://webpages.charter.net/brianhill/500.htm

Collins filters $$$$$$$$$$
 

Cuz they're in demand and no longer made. Pretty simple, really.

"Brian Hill" wrote in message
...
Why are they so expensive? I've put off buying some for my Collins rig
because of the price.


--

Regards
B.H.

Brian's Basement
http://webpages.charter.net/brianhill/6.htm

Brian's Radio Universe
http://webpages.charter.net/brianhill/500.htm

Collins filters $$$$$$$$$$
 

"Old Guy" wrote in message
news:1130290220.c4efe347713261456df1beb6517134be@m eganetnews2...
Cuz they're in demand and no longer made. Pretty simple, really.



They are still being made.

Collins filters $$$$$$$$$$
 

"Old Guy" ) writes:
Cuz they're in demand and no longer made. Pretty simple, really.

There was a review of a recent line of Rockwell/Collins mechanical
filters somewhere in the last years of "Communications Quarterly" so
I suspect they are still being made.

Collins mechanical filters were always costly. Surely some of it
is because they aren't simple to manufacture. They also supply
good performance. They were never a mass item, so there was nothing
to drive cost down as demand went up.

Note that commercially made crystal filters also carry a relatively
high price tag.

Michael VE2BVW

"Brian Hill" wrote in message
...
Why are they so expensive? I've put off buying some for my Collins rig
because of the price.


--

Regards
B.H.

Brian's Basement
http://webpages.charter.net/brianhill/6.htm

Brian's Radio Universe
http://webpages.charter.net/brianhill/500.htm

Collins filters $$$$$$$$$$
 

Behold, Michael Black scribed on tube chassis:


Collins mechanical filters were always costly. Surely some of it
is because they aren't simple to manufacture.

Heh, where's the overseas knockoffs?

--
Gregg "t3h g33k"
http://geek.scorpiorising.ca
*Ratings are for transistors, tubes have guidelines*

Collins filters $$$$$$$$$$
 

Gregg wrote:

Behold, Michael Black scribed on tube chassis:

Collins mechanical filters were always costly. Surely some of it
is because they aren't simple to manufacture.

Heh, where's the overseas knockoffs?

--
Gregg "t3h g33k"
http://geek.scorpiorising.ca
*Ratings are for transistors, tubes have guidelines*


Lafayette Radio used to sell them, but they are long gone. There
wasn't enough of a market for the knock offs, either.

--
?

Michael A. Terrell
Central Florida

Collins filters $$$$$$$$$$
 

"Michael A. Terrell" wrote in message
...
Gregg wrote:

Lafayette Radio used to sell them, but they are long gone. There
wasn't enough of a market for the knock offs, either.

--
?

Michael A. Terrell
Central Florida

Collins got on them regarding patent infringement issues.

Pete

Collins filters $$$$$$$$$$
 

Gregg ) writes:
Behold, Michael Black scribed on tube chassis:


Collins mechanical filters were always costly. Surely some of it
is because they aren't simple to manufacture.

Heh, where's the overseas knockoffs?


Well there were other manufacturers who made mechanical filters in
the sixties. You'd see them in the Lafayette catalog, and mentioned
in reviews (though I've always wondered if some of those reviews got
it wrong, and they weren't mechanical filters). But they were never
commmon. They were cheaper than Collins filters, but I have no idea how
absolutely cheap they were for the time. I don't recall coming across
real specs in the old magazines, either. I also recall in recent years
that it was those other filters that used foam rubber inside, and by
now much of that has deteriorated.

Michael VE2BVW

Collins filters $$$$$$$$$$
 

"Michael A. Terrell" ) writes:
Gregg wrote:

Behold, Michael Black scribed on tube chassis:

Collins mechanical filters were always costly. Surely some of it
is because they aren't simple to manufacture.

Heh, where's the overseas knockoffs?

--
Gregg "t3h g33k"
http://geek.scorpiorising.ca
*Ratings are for transistors, tubes have guidelines*


Lafayette Radio used to sell them, but they are long gone. There
wasn't enough of a market for the knock offs, either.

And of course, for a lot of things ceramic filters filled the need
for a filter better than a string of IF transformers (or a single crystal
in a phasing arrangement), but at low cost. You see them in most cheap
am/fm radios now, where their size and cost is likely why they are
used, through shortwave receivers costing hundreds of dollars, to even
ham transceivers (though in that instance they tend to be used in
conjunction with some sort of better filter). And the ceramic filters
do cover a lot of territory, going from those three terminal ones we
see in the average am/fm radio, to multiple pole filters seen in those
more expensive bits of equipment.

Michael VE2BVW

Collins filters $$$$$$$$$$
 

" Uncle Peter" ) writes:
"Michael A. Terrell" wrote in message
...
Gregg wrote:

Lafayette Radio used to sell them, but they are long gone. There
wasn't enough of a market for the knock offs, either.

Collins got on them regarding patent infringement issues.

Pete

I'd never given thought to that. Was it the concept of mechanical
filters that Collins had patented, or just a specific implementation?

SOmeone once wrote a receiver construction article, I think it was
in CQ, in the early sixties, that described how to make your own mechanical
filter. Despite the number of times I've mentioned that in the newsgroups,
I've yet to dig out the article.

Michael VE2BVW

Collins filters $$$$$$$$$$
 

"Michael Black" wrote in message
...

Well there were other manufacturers who made mechanical filters in
the sixties. You'd see them in the Lafayette catalog, and mentioned
in reviews (though I've always wondered if some of those reviews got
it wrong, and they weren't mechanical filters). But they were never
commmon. They were cheaper than Collins filters, but I have no idea how
absolutely cheap they were for the time. I don't recall coming across
real specs in the old magazines, either. I also recall in recent years
that it was those other filters that used foam rubber inside, and by
now much of that has deteriorated.

Michael VE2BVW


I had that happen with the filters in my NRD-515 JRC receiver.
Fortunately, it wasn't too difficult to open the filters up, which
allowed me to dissolve the old foam rubber
blanket that cushioned the mechanical filter elements. The
foam had to decayed to a chewing gum consistency and the
filter losses skyrocked. These were late 70s or early 80s
vintage IIRC. Regarding the patent issues, I don't recall
the particulars.

Pete k1zjh

Collins filters $$$$$$$$$$
 

Uncle Peter wrote:


I had that happen with the filters in my NRD-515 JRC receiver.
Fortunately, it wasn't too difficult to open the filters up, which
allowed me to dissolve the old foam rubber
blanket that cushioned the mechanical filter elements. The
foam had to decayed to a chewing gum consistency and the
filter losses skyrocked. These were late 70s or early 80s
vintage IIRC. Regarding the patent issues, I don't recall
the particulars.

Pete k1zjh

Does the name Kokusai ring a bell? I used one in a hoimebrew set in the
mid-70s and it was a really good filter. But alas, I recall hearing
later that this was one of the brands that had the foam problem.

-Bill

Collins filters $$$$$$$$$$
 

"Bill" wrote in message
...
Uncle Peter wrote:


I had that happen with the filters in my NRD-515 JRC receiver.
Fortunately, it wasn't too difficult to open the filters up, which
allowed me to dissolve the old foam rubber
blanket that cushioned the mechanical filter elements. The
foam had to decayed to a chewing gum consistency and the
filter losses skyrocked. These were late 70s or early 80s
vintage IIRC. Regarding the patent issues, I don't recall
the particulars.

Pete k1zjh

Does the name Kokusai ring a bell? I used one in a hoimebrew set in the
mid-70s and it was a really good filter. But alas, I recall hearing
later that this was one of the brands that had the foam problem.

-Bill

I'm hearing more ringing than might be attributed to my
tinnitus affliction.....

Collins filters $$$$$$$$$$
 

Hi,

The "DX Engineering" rf speech clipper models
made for both the Collins 32S-3 and for the KWM-2
used a Kokusai mechanical filter following
the clipper stage. You'd remove a tube
from the IF strip of the Collins transmitter,
plug the DX Engineering device into the tube socket,
and plug the tube into the DX engineering device:
and Bingo, you have a speech clipper available.
There was a toggle switch included for in/out control.
Your effective clipping level was determined by the transmitter's
original audio gain control.

They sounded pretty good on the air,
compared to many "processors" of the time.

The British KW company used a Kokusai filter
(model MF-455-10AZ) in their KW2000 SSB transceiver,
which was pretty highly regarded.

A Kokusai filter assembly (including two matching transformers)
cost around $20 in the Lafayette catalog.
A Collins filter cost about twice that in the early 1960's.

I saw a Popular Electronics article, about adding a mechanical
filter by replacing an existing IF transformer in a receiver.
In the article, he used a resistive load in the plate circuit
of the previous stage, and capacitor-coupled
to and from the two Lafayette matching transformers.
I guess he didn't trust the transformer voltage rating.

I recall a Japanese web site had pictures showing
the disassembly and cleaning of a Kokusai filter.
I believe he used acetone to clean off the gunk
that had once been the foam plastic shock absorber
surrounding the mechanical filter disks.

73,
Ed Knobloch



Does the name Kokusai ring a bell? I used one in a hoimebrew set in the
mid-70s and it was a really good filter. But alas, I recall hearing
later that this was one of the brands that had the foam problem.

-Bill