need Yaseu FT101 elmer
 

Hi,

Receiver works okay. However, when I set the FT101 to TUNE and switch
mike to MOX per tuning procedure, I get no final current. Also in CW
mode there is not switching to transmit. Help!!!

Thanks in advance,

The Eternal Squire

need Yaseu FT101 elmer
 

Did you flip the filament switch on?

The CW will work only if the vox system is functional.

IF you still have trouble contact me via my e-mail at

w4nti@NOSPAM mindspring. com

Then when the SPAM catcher gets you, do what it says.

Dan/W4NTI

wrote in message
oups.com...
Hi,

Receiver works okay. However, when I set the FT101 to TUNE and switch
mike to MOX per tuning procedure, I get no final current. Also in CW
mode there is not switching to transmit. Help!!!

Thanks in advance,

The Eternal Squire