There are two relays in the HX50 transmitter/exciter. They are open frame
DPDT 650 ohm coil with both of the coils in series as the plate resistor
connected in series to the plate V107 pin6 plate. The output is a single
6DQ5 tube that is capable of CW, SSB at 60w and AM at 15 watts.

Does anyone know of a source for these relays, or a substitute? If not what
should the contacts be rated at current and voltage wise? I been looking a
Mouser, Digikey and Newark and think I may have a sub. It will need some
crafting and skill to work it into the RF section at the antenna connector.

Thanks in advance,
Paul.
paul at ppinyot dot c o m.