Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Not much luck on abpr, so I'll try it here. Got this on ebay just for
the fun of it, pics on binary under whatzitfor. It's a Signal Corps Frequency Meter type BC-153, 75 to 1500kc. It consists of a large tuning cap and three coils that are switched in series to get three different bands, 75-225kc, 200-700kc and 600-1600kc. These form a tank circuit with a meter in series with the tuning cap and coil. It also has an adjustable buzzer feeding the top of the tank, and a battery for the buzzer. I figure you set the buzzer going and pick up the freq you want with the tuning. Someone has put a dc voltmeter in place of the original one, probably was an ac ammeter, which shows the internal tank current, a power indicator probably? There are no external connections except to add more inductance for a lower resonance. My guess is, this tank circuit radiated the resonant frequency to be picked up by a receiver, like a sig gen. Any guesses out there, and what type meter might have been used? I think this might be early 30's. Any info available? Ken |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
SWR - wtf? | Antenna | |||
DXPEDITION REPORT: Grayland, WA, June 11-12 | Shortwave | |||
GRAYLAND 2004 FALL DXPEDITION: Compiled Logs for Oct 15-17 (Part 1) | Shortwave | |||
Channel-based AM tube tuner (was Designs for a single frequency high performance AM-MW receiver?) | Shortwave | |||
FA: WWII SIGNAL CORPS FIELD STRENGTH METER, model I-95-A | Boatanchors |