RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Boatanchors (https://www.radiobanter.com/boatanchors/)
-   -   Wanted Commercial AM Transmitters (https://www.radiobanter.com/boatanchors/93967-wanted-commercial-am-transmitters.html)

Radra May 5th 06 01:58 AM

Wanted Commercial AM Transmitters
 
Looking for AM transmitters of the type used for broadcasting. Want
something in the 500 to 2000 Watt range. Must be all solid state.
Typical examples include: Harris SX-1A, Gates One, Armstrong 1000B,
Omnitronix AM 1000A, etc.

These may not be "vintage boat anchors" yet, but perhaps they can be
found associated with such gear.

I suspect the best place to find one may be at radio stations who are
surplusing gear. Could use some advice on how to contact them.

Any ideas will be appreciated. Please reply online as my Google email
address is no longer valid.

Vinton


Scott Dorsey May 5th 06 08:25 PM

Wanted Commercial AM Transmitters
 
In article .com,
Radra wrote:
Looking for AM transmitters of the type used for broadcasting. Want
something in the 500 to 2000 Watt range. Must be all solid state.
Typical examples include: Harris SX-1A, Gates One, Armstrong 1000B,
Omnitronix AM 1000A, etc.

These may not be "vintage boat anchors" yet, but perhaps they can be
found associated with such gear.

I suspect the best place to find one may be at radio stations who are
surplusing gear. Could use some advice on how to contact them.


Put an ad in Radio World. Or call some broadcast supply houses like
Armstrong Transmitters or Mooretronix.
--scott

--
"C'est un Nagra. C'est suisse, et tres, tres precis."

William Warren May 6th 06 04:35 AM

Wanted Commercial AM Transmitters
 
Radra wrote:
Looking for AM transmitters of the type used for broadcasting. Want
something in the 500 to 2000 Watt range. Must be all solid state.
Typical examples include: Harris SX-1A, Gates One, Armstrong 1000B,
Omnitronix AM 1000A, etc.

These may not be "vintage boat anchors" yet, but perhaps they can be
found associated with such gear.

I suspect the best place to find one may be at radio stations who are
surplusing gear. Could use some advice on how to contact them.

Any ideas will be appreciated. Please reply online as my Google email
address is no longer valid.

Vinton



Vinton,

I suggest you place an ad in Broadcasting, and/or the other trade
magazines, but please keep in mind that type-approved transmitters are
intended for commercial use, and are priced accordingly.

Unless you find a bankruptcy auction and you have enough cash to compete
with other broadcasters, you will do better looking for older Ham gear.

HTH.

William

--

William Warren

(Filter noise from my address for direct replies)

Radra May 7th 06 05:18 AM

Wanted Commercial AM Transmitters
 
I hope to find a unit at a reasonable price. Some of the transmitters
I listed originally sold new for less than the cost of a decent piece
of test equipment; so wouldn't expect used ones to be very expensive.
Bear in mind I am looking at "low power" models, not the high-power
behemoths. Don't know any hams who really want to output 50 kW,
although I do suppose it would serve to keep winter snow off the roof.

Radio stations have been known to simply scrap their old transmitters
as they upgraded to later models. Not much demand for the large older
units. The situation might be different for FM broadcast transmittters
though.


NC Cycler February 16th 12 11:29 PM

Quote:

Originally Posted by Radra (Post 428969)
Looking for AM transmitters of the type used for broadcasting. Want
something in the 500 to 2000 Watt range. Must be all solid state.
Typical examples include: Harris SX-1A, Gates One, Armstrong 1000B,
Omnitronix AM 1000A, etc.

Vinton

I have an Omnitronix 1000A that I have restored to operational condition. It is currently crystalled for 610 KHz. (non-synthesized) It was returned from an overseas site that had very poor AC power quality. All those issues have been corrected and it is now ready to be put back into service. Comes with all cables, a spare parts kit including one spare PA module. I'm located in Raleigh, NC. Drop me a post if it might be of interest. Thanks.
NC Cycler


All times are GMT +1. The time now is 11:23 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com