| Home |
| Search |
| Today's Posts |
|
#1
June 21st 06, 07:50 AM
posted to rec.radio.amateur.boatanchors
|
|||
|
|||
suggested keyer weight for amp tuning
Hello, I have a little used MFJ-492 electronic keyer that I've decided to
put to good use as an amplifier tuner. (This is my first amp). The keyer defaults to a 50% duty cycle and I would like to get this down to around 10 or 20 percent. Any suggestions on what weight to use? This keyer is adjustable from 5 to 95 percent weight...I do not have a scope so would have to guess by ear. Thanks for the help. Craig KB8FGC |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Supporting theory that Antennas "Match" to 377 Ohms (Free space) | Antenna | |||
| Channel-based AM tube tuner (was Designs for a single frequency high performance AM-MW receiver?) | Shortwave | |||
| FS: Hallicrafters HT-4 Transmitter Tuning Units $30 | Boatanchors | |||
| Hallicrafters Tuning Units For HT-4 | Swap | |||
Threaded Mode
