| Home |
| Search |
| Today's Posts |
|
|
|
#1
February 21st 07, 05:22 AM
posted to rec.radio.cb
|
|||
|
|||
CB noise in ford ranger
Scott in Baltimore wrote:
Paul Johnson wrote: Steveo wrote: (Timothy Midkiff) wrote: The truck has a 2.3L with no p/s or ac. I don't think it's coming from the ignition due to no change in the noise during acceleration. When the ignition is turned to the on position you can here the electric fuel pump come on and quite. I am quite shure of the pump being my problem. My question is this. If I just replace the fuel pump would the new one be quiet you think? I'm guessing that the fuel pump is originally the one that came with the truck. IIRC Ford has had that problem almost forever since the advent of the electric in-tank fuel-pump. I'm kind of leaning towards bad ground. Run the CB's negative to something well-grounded like a bolt on the frame if possible. Did that with a 2001 Ford Ranger my roommate used to have and it got rid of the noise. And connect the chassis to the frame to the battery... Those ground straps and their connections go bad! I'm not convinced either vehicle mentioned (mine or my former roommate's) ever had a good ground to start with. Another possibility if the truck turns out to have poor grounding in general (such as my mid-90's Kia Sportage) is go with the best ground you can reasonably get to and use something like the Ranger RCI 2950 and run it with ANL/NB turned on and get good at reflexively adjusting the RF gain. Any sideband radio has better filters then an AM only radio. I question that assertion. I had been running a detachable-face Midland job that had sideband and that thing was noisy as all get-go on that. -- Posted via a free Usenet account from http://www.teranews.com |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Newbie Question: HELP!! Antenna Noise | Antenna | |||
| Installing CB in a 1999 Ford Ranger? | CB | |||
| Icom 746pro Testimonial | Shortwave | |||
| Automatic RF noise cancellation and audio noise measurement | Homebrew | |||
| CCIR Coefficients METHOD 6 REC533 // AUCKLAND --> SEATTLE | Shortwave | |||
Hybrid Mode
