Neat Collins Transmitter
 

Hello All:

Though you mike like seeing this. Yeah sure ok for a driver.

http://cgi.ebay.com/VINTAGE-COLLINS-...cmdZVie wItem

Jay in the Mojave

Neat Collins Transmitter
 

Jay in the Mojave wrote:
Hello All:

Though you mike like seeing this. Yeah sure ok for a driver.

http://cgi.ebay.com/VINTAGE-COLLINS-...R_W0QQitemZ200
172204068QQihZ010QQcmdZViewItem

Jay in the Mojave

Hello Jay

That will take up too much space in my mobile-home. Please advise.

--
http://NewsReader.Com/

Neat Collins Transmitter
 

Steveo wrote:
Jay in the Mojave wrote:
Hello All:

Though you mike like seeing this. Yeah sure ok for a driver.

http://cgi.ebay.com/VINTAGE-COLLINS-...R_W0QQitemZ200
172204068QQihZ010QQcmdZViewItem

Jay in the Mojave

Hello Jay

That will take up too much space in my mobile-home. Please advise.


Hello Steveo:

I knew this was going to cause trouble. Well yeah there will be a room
concern here, you can mount it in the back of the truck, or in the
trunk. Do I have to do everything?

Jay in the Mojave

Neat Collins Transmitter
 

Jay in the Mojave wrote:
Steveo wrote:
Jay in the Mojave wrote:
Hello All:

Though you mike like seeing this. Yeah sure ok for a driver.

http://cgi.ebay.com/VINTAGE-COLLINS-...TTER_W0QQitemZ
200 172204068QQihZ010QQcmdZViewItem

Jay in the Mojave

Hello Jay

That will take up too much space in my mobile-home. Please advise.


Hello Steveo:

I knew this was going to cause trouble. Well yeah there will be a room
concern here, you can mount it in the back of the truck, or in the
trunk. Do I have to do everything?

Jay in the Mojave

Them 811's ain't in in love with the pot holes or speed bumps in my mobile
home park.

(pot smokers seem to go trouble free tho) go figure

Yes Jay, do everything please! hehe

--
http://NewsReader.Com/

Neat Collins Transmitter
 

Steveo wrote:
Jay in the Mojave wrote:
Steveo wrote:
Jay in the Mojave wrote:
Hello All:

Though you mike like seeing this. Yeah sure ok for a driver.

http://cgi.ebay.com/VINTAGE-COLLINS-...TTER_W0QQitemZ
200 172204068QQihZ010QQcmdZViewItem

Jay in the Mojave

Hello Jay

That will take up too much space in my mobile-home. Please advise.

Hello Steveo:

I knew this was going to cause trouble. Well yeah there will be a room
concern here, you can mount it in the back of the truck, or in the
trunk. Do I have to do everything?

Jay in the Mojave

Them 811's ain't in in love with the pot holes or speed bumps in my mobile
home park.

(pot smokers seem to go trouble free tho) go figure

Yes Jay, do everything please! hehe

I'll bet there will be a lot of Ham Bones want a "Bitchen" old AM
Transmitter like this, for the lower bands. I have listened in to them,
some pretty neat-O stuff out there.

http://www.rwonline.com/reference-ro...meJune20.shtml

Jay in the Mojave

Neat Collins Transmitter
 

Jay in the Mojave wrote:
Steveo wrote:
Jay in the Mojave wrote:
Steveo wrote:
Jay in the Mojave wrote:
Hello All:

Though you mike like seeing this. Yeah sure ok for a driver.

http://cgi.ebay.com/VINTAGE-COLLINS-...MITTER_W0QQite
mZ 200 172204068QQihZ010QQcmdZViewItem

Jay in the Mojave

Hello Jay

That will take up too much space in my mobile-home. Please advise.

Hello Steveo:

I knew this was going to cause trouble. Well yeah there will be a room
concern here, you can mount it in the back of the truck, or in the
trunk. Do I have to do everything?

Jay in the Mojave

Them 811's ain't in in love with the pot holes or speed bumps in my
mobile home park.

(pot smokers seem to go trouble free tho) go figure

Yes Jay, do everything please! hehe

I'll bet there will be a lot of Ham Bones want a "Bitchen" old AM
Transmitter like this, for the lower bands. I have listened in to them,
some pretty neat-O stuff out there.

http://www.rwonline.com/reference-ro...hromeJune20.sh
tml

Jay in the Mojave

That may be fine for those ancient mary operators Jay, but I run strictly
ssb only with my 811's. Although I do get the occasional bleed-over from
them am-tards. (mostly misguided trucker ****sticks) in my trailer park.

--
http://NewsReader.Com/

Neat Collins Transmitter
 

Steveo wrote:
Jay in the Mojave wrote:
Steveo wrote:
Jay in the Mojave wrote:
Steveo wrote:
Jay in the Mojave wrote:
Hello All:

Though you mike like seeing this. Yeah sure ok for a driver.

http://cgi.ebay.com/VINTAGE-COLLINS-...MITTER_W0QQite
mZ 200 172204068QQihZ010QQcmdZViewItem

Jay in the Mojave

Hello Jay

That will take up too much space in my mobile-home. Please advise.

Hello Steveo:

I knew this was going to cause trouble. Well yeah there will be a room
concern here, you can mount it in the back of the truck, or in the
trunk. Do I have to do everything?

Jay in the Mojave

Them 811's ain't in in love with the pot holes or speed bumps in my
mobile home park.

(pot smokers seem to go trouble free tho) go figure

Yes Jay, do everything please! hehe

I'll bet there will be a lot of Ham Bones want a "Bitchen" old AM
Transmitter like this, for the lower bands. I have listened in to them,
some pretty neat-O stuff out there.

http://www.rwonline.com/reference-ro...hromeJune20.sh
tml

Jay in the Mojave

That may be fine for those ancient mary operators Jay, but I run strictly
ssb only with my 811's. Although I do get the occasional bleed-over from
them am-tards. (mostly misguided trucker ****sticks) in my trailer park.


Yeah I use to live close to the freeway when I lived in the San Fernando
Valley. But I installed a 1 dB and 10 dB step attenuator into the
receiver. Usually let it set on 6 dB down, kept everything quiet.

Again with my DSP, Digital IF Filters, Beam Antenna, and attunator, I
can usually dial em out. Unless there are in the front yard throwing
beer cans at me and calling me a sissy.

Jay in the Mojave

Neat Collins Transmitter
 

Jay in the Mojave wrote:
Unless there are in the front yard throwing
beer cans at me and calling me a sissy.

Jay in the Mojave

LMFAO!! Hate that!

--
http://NewsReader.Com/

Neat Collins Transmitter
 

Steveo wrote:
Jay in the Mojave wrote:
Unless there are in the front yard throwing
beer cans at me and calling me a sissy.

Jay in the Mojave

LMFAO!! Hate that!

Hey btw I'm liking the sound of those vintage elctro voice mics, ever try
one? Kinda bass sounding but I like that sound in the pile.

--
http://NewsReader.Com/

Neat Collins Transmitter
 

Steveo wrote:
Steveo wrote:
Jay in the Mojave wrote:
Unless there are in the front yard throwing
beer cans at me and calling me a sissy.

Jay in the Mojave

LMFAO!! Hate that!

Hey btw I'm liking the sound of those vintage elctro voice mics, ever try
one? Kinda bass sounding but I like that sound in the pile.

Yes the Electro Voice Mic's worked GREAT! Had one hooked up to my
Johnson Viking Valant Transmitter. Had broadcast quality audio. I know
that there are mic equalizers out there that can adjust the different
bands in the audio voice band. To make what ever mic you have hum like
you want it too.

You have to play with the thing to get it to where you want it tho. I
like a low base response, and a ever so slight echo. Going to work one
day as the sun was coming up I heard a station in Fla skip in to
California, his signal was neck and neck with the noise, but he had a
slight echo and I could copy every word he said.

Sop I would have a Electro Voice mic with one of those **** hot
equalizers, and a echo board in the mic. But thats just me.

Jay in the Mojave

Neat Collins Transmitter
 

Jay in the Mojave wrote:
Steveo wrote:
Steveo wrote:
Jay in the Mojave wrote:
Unless there are in the front yard throwing
beer cans at me and calling me a sissy.

Jay in the Mojave

LMFAO!! Hate that!

Hey btw I'm liking the sound of those vintage elctro voice mics, ever
try one? Kinda bass sounding but I like that sound in the pile.

Yes the Electro Voice Mic's worked GREAT! Had one hooked up to my
Johnson Viking Valant Transmitter. Had broadcast quality audio. I know
that there are mic equalizers out there that can adjust the different
bands in the audio voice band. To make what ever mic you have hum like
you want it too.

You have to play with the thing to get it to where you want it tho. I
like a low base response, and a ever so slight echo. Going to work one
day as the sun was coming up I heard a station in Fla skip in to
California, his signal was neck and neck with the noise, but he had a
slight echo and I could copy every word he said.

Sop I would have a Electro Voice mic with one of those **** hot
equalizers, and a echo board in the mic. But thats just me.

Jay in the Mojave


Yeah they have a unique kinda sound..and them suckers are pretty COOL to
look at! I talk to a guy outside of Detroit from time to time that runs an
elctro-voice 640 iirc straight to a kenwood 430, and his audio cuts right
though the pile everytime. He gets tired of the compliments with it. I
dunno but I been told elctro voice is mighty bold! hehe

--
http://NewsReader.Com/

Neat Collins Transmitter
 

Steveo wrote:

Yeah they have a unique kinda sound..and them suckers are pretty COOL to
look at! I talk to a guy outside of Detroit from time to time that runs an
elctro-voice 640 iirc straight to a kenwood 430, and his audio cuts right
though the pile everytime. He gets tired of the compliments with it. I
dunno but I been told elctro voice is mighty bold! hehe


Steveo:

Look at E-Bay for those mic's I seen all kinds of Electro Voice Mics
there. Or just look around, you will run one down.

Jay in the Great Mojave Desert, ....just down the road ah ways from the
fillin station.

Neat Collins Transmitter
 

Jay in the Mojave wrote:
Steveo wrote:

Yeah they have a unique kinda sound..and them suckers are pretty COOL
to look at! I talk to a guy outside of Detroit from time to time that
runs an elctro-voice 640 iirc straight to a kenwood 430, and his audio
cuts right though the pile everytime. He gets tired of the compliments
with it. I dunno but I been told elctro voice is mighty bold! hehe


Steveo:

Look at E-Bay for those mic's I seen all kinds of Electro Voice Mics
there. Or just look around, you will run one down.

Jay in the Great Mojave Desert, ....just down the road ah ways from the
fillin station.

You know i Jay, they're out there.

Scroll down and review a few here

http://www.eham.net/reviews/products/18

--
http://NewsReader.Com/

Neat Collins Transmitter
 

Steveo wrote:
Jay in the Mojave wrote:
Steveo wrote:

Yeah they have a unique kinda sound..and them suckers are pretty COOL
to look at! I talk to a guy outside of Detroit from time to time that
runs an elctro-voice 640 iirc straight to a kenwood 430, and his
audio cuts right though the pile everytime. He gets tired of the
compliments with it. I dunno but I been told elctro voice is mighty
bold! hehe


Steveo:

Look at E-Bay for those mic's I seen all kinds of Electro Voice Mics
there. Or just look around, you will run one down.

Jay in the Great Mojave Desert, ....just down the road ah ways from the
fillin station.

You know i Jay, they're out there.

Scroll down and review a few here

http://www.eham.net/reviews/products/18

Hey btw I got that 520SE working, we had to replace the band-switch..I hear
that was a common problem on those rigs so no surprise. That radio is set
for a high impedance vintage studio boom mounted mic of some sort, with
those tube finals.

Tube finals into a tube amp usually makes for fairly good audio, right?

--
http://NewsReader.Com/

Neat Collins Transmitter
 

Steveo wrote:
Steveo wrote:
Jay in the Mojave wrote:
Steveo wrote:

Yeah they have a unique kinda sound..and them suckers are pretty COOL
to look at! I talk to a guy outside of Detroit from time to time that
runs an elctro-voice 640 iirc straight to a kenwood 430, and his
audio cuts right though the pile everytime. He gets tired of the
compliments with it. I dunno but I been told elctro voice is mighty
bold! hehe

Steveo:

Look at E-Bay for those mic's I seen all kinds of Electro Voice Mics
there. Or just look around, you will run one down.

Jay in the Great Mojave Desert, ....just down the road ah ways from the
fillin station.

You know i Jay, they're out there.

Scroll down and review a few here

http://www.eham.net/reviews/products/18

Hey btw I got that 520SE working, we had to replace the band-switch..I hear
that was a common problem on those rigs so no surprise. That radio is set
for a high impedance vintage studio boom mounted mic of some sort, with
those tube finals.

Tube finals into a tube amp usually makes for fairly good audio, right?

Hello Steveo:

Worked on putting up a Tower and antenna today out by Victorvile Ca,
there a bunch of guys there, got sun burned and all. But the antenna is
up and humming.

Yeah that high impedance mic should work well with the that older hi Zo
input. Worth a try Id say.

I was ah thinkin about making a custom made mic head that would fit on
the D-104 Mic stands, UG8 or 9 or something like that. Something that is
large with ribs or fins, like a 59 Cadalack, something out of the 1950's
looking type ah thing. Have bright LED's lights and be able to switch to
a few different mic cartridges for different sounds.

Jay in the Mojave

Neat Collins Transmitter
 

Jay in the Mojave wrote:
Steveo wrote:

Steveo wrote:

Jay in the Mojave wrote:

Steveo wrote:

Yeah they have a unique kinda sound..and them suckers are pretty COOL
to look at! I talk to a guy outside of Detroit from time to time that
runs an elctro-voice 640 iirc straight to a kenwood 430, and his
audio cuts right though the pile everytime. He gets tired of the
compliments with it. I dunno but I been told elctro voice is mighty
bold! hehe

Steveo:

Look at E-Bay for those mic's I seen all kinds of Electro Voice Mics
there. Or just look around, you will run one down.

Jay in the Great Mojave Desert, ....just down the road ah ways from the
fillin station.

You know i Jay, they're out there.

Scroll down and review a few here

http://www.eham.net/reviews/products/18

Hey btw I got that 520SE working, we had to replace the band-switch..I
hear
that was a common problem on those rigs so no surprise. That radio is set
for a high impedance vintage studio boom mounted mic of some sort, with
those tube finals.

Tube finals into a tube amp usually makes for fairly good audio, right?

Hello Steveo:

Worked on putting up a Tower and antenna today out by Victorvile Ca,
there a bunch of guys there, got sun burned and all. But the antenna is
up and humming.

Yeah that high impedance mic should work well with the that older hi Zo
input. Worth a try Id say.

I was ah thinkin about making a custom made mic head that would fit on
the D-104 Mic stands, UG8 or 9 or something like that. Something that is
large with ribs or fins, like a 59 Cadalack, something out of the 1950's
looking type ah thing. Have bright LED's lights and be able to switch to
a few different mic cartridges for different sounds.

Jay in the Mojave


Hey Jay. Victorville aint what it used to be when the AirForce base was
still there. For that matter there wasn't much there when it was around
hehehe

Neat Collins Transmitter
 

jim wrote:

Hey Jay. Victorville aint what it used to be when the AirForce base was
still there. For that matter there wasn't much there when it was around
hehehe


Yeah it still isn't much around there. Have to go in Parblossum to
Billey Bobs restaurant for good food and the best old movie photos I
have ever seen. We use to go there ever other Saturday morning for
breakfast. I loved the furnace there with the gas pipe coming out of the
ceiling feeding it.

Jay in the Mojave

Neat Collins Transmitter
 

"jim" wrote in message
...


Jay in the Mojave wrote:
Steveo wrote:

Steveo wrote:

Jay in the Mojave wrote:

Steveo wrote:

Yeah they have a unique kinda sound..and them suckers are pretty COOL
to look at! I talk to a guy outside of Detroit from time to time that
runs an elctro-voice 640 iirc straight to a kenwood 430, and his
audio cuts right though the pile everytime. He gets tired of the
compliments with it. I dunno but I been told elctro voice is mighty
bold! hehe

Steveo:

Look at E-Bay for those mic's I seen all kinds of Electro Voice Mics
there. Or just look around, you will run one down.

Jay in the Great Mojave Desert, ....just down the road ah ways from
the
fillin station.

You know i Jay, they're out there.

Scroll down and review a few here

http://www.eham.net/reviews/products/18

Hey btw I got that 520SE working, we had to replace the band-switch..I
hear
that was a common problem on those rigs so no surprise. That radio is
set
for a high impedance vintage studio boom mounted mic of some sort, with
those tube finals.

Tube finals into a tube amp usually makes for fairly good audio, right?

Hello Steveo:

Worked on putting up a Tower and antenna today out by Victorvile Ca,
there a bunch of guys there, got sun burned and all. But the antenna is
up and humming.

Yeah that high impedance mic should work well with the that older hi Zo
input. Worth a try Id say.

I was ah thinkin about making a custom made mic head that would fit on
the D-104 Mic stands, UG8 or 9 or something like that. Something that is
large with ribs or fins, like a 59 Cadalack, something out of the 1950's
looking type ah thing. Have bright LED's lights and be able to switch to
a few different mic cartridges for different sounds.

Jay in the Mojave


Hey Jay. Victorville aint what it used to be when the AirForce base was
still there. For that matter there wasn't much there when it was around
hehehe


Older than the ground are you ;-}


Landshark

Neat Collins Transmitter
 

Jay in the Mojave wrote:
Steveo wrote:
Steveo wrote:
Jay in the Mojave wrote:
Steveo wrote:

Yeah they have a unique kinda sound..and them suckers are pretty
COOL to look at! I talk to a guy outside of Detroit from time to
time that runs an elctro-voice 640 iirc straight to a kenwood 430,
and his audio cuts right though the pile everytime. He gets tired of
the compliments with it. I dunno but I been told elctro voice is
mighty bold! hehe

Steveo:

Look at E-Bay for those mic's I seen all kinds of Electro Voice Mics
there. Or just look around, you will run one down.

Jay in the Great Mojave Desert, ....just down the road ah ways from
the fillin station.

You know i Jay, they're out there.

Scroll down and review a few here

http://www.eham.net/reviews/products/18

Hey btw I got that 520SE working, we had to replace the band-switch..I
hear that was a common problem on those rigs so no surprise. That radio
is set for a high impedance vintage studio boom mounted mic of some
sort, with those tube finals.

Tube finals into a tube amp usually makes for fairly good audio, right?

Hello Steveo:

Worked on putting up a Tower and antenna today out by Victorvile Ca,
there a bunch of guys there, got sun burned and all. But the antenna is
up and humming.

Yeah that high impedance mic should work well with the that older hi Zo
input. Worth a try Id say.

I was ah thinkin about making a custom made mic head that would fit on
the D-104 Mic stands, UG8 or 9 or something like that. Something that is
large with ribs or fins, like a 59 Cadalack, something out of the 1950's
looking type ah thing. Have bright LED's lights and be able to switch to
a few different mic cartridges for different sounds.

Jay in the Mojave

Yeah Jay that would be slick, I like the look of those vintage desk mics.

Neat Collins Transmitter
 

Landshark wrote:
"jim" wrote in message
...


Jay in the Mojave wrote:

Steveo wrote:


Steveo wrote:


Jay in the Mojave wrote:


Steveo wrote:


Yeah they have a unique kinda sound..and them suckers are pretty COOL
to look at! I talk to a guy outside of Detroit from time to time that
runs an elctro-voice 640 iirc straight to a kenwood 430, and his
audio cuts right though the pile everytime. He gets tired of the
compliments with it. I dunno but I been told elctro voice is mighty
bold! hehe


Steveo:

Look at E-Bay for those mic's I seen all kinds of Electro Voice Mics
there. Or just look around, you will run one down.

Jay in the Great Mojave Desert, ....just down the road ah ways from
the
fillin station.


You know i Jay, they're out there.

Scroll down and review a few here

http://www.eham.net/reviews/products/18


Hey btw I got that 520SE working, we had to replace the band-switch..I
hear
that was a common problem on those rigs so no surprise. That radio is
set
for a high impedance vintage studio boom mounted mic of some sort, with
those tube finals.

Tube finals into a tube amp usually makes for fairly good audio, right?


Hello Steveo:

Worked on putting up a Tower and antenna today out by Victorvile Ca,
there a bunch of guys there, got sun burned and all. But the antenna is
up and humming.

Yeah that high impedance mic should work well with the that older hi Zo
input. Worth a try Id say.

I was ah thinkin about making a custom made mic head that would fit on
the D-104 Mic stands, UG8 or 9 or something like that. Something that is
large with ribs or fins, like a 59 Cadalack, something out of the 1950's
looking type ah thing. Have bright LED's lights and be able to switch to
a few different mic cartridges for different sounds.

Jay in the Mojave


Hey Jay. Victorville aint what it used to be when the AirForce base was
still there. For that matter there wasn't much there when it was around
hehehe



Older than the ground are you ;-}


Landshark


No but your jokes are Yoda ;)

Weren't you down by Victorville recently for a Bronco fest or something?

Neat Collins Transmitter
 

"jim" wrote in message ...


Landshark wrote:
"jim" wrote in message ...


Jay in the Mojave wrote:

Steveo wrote:


Steveo wrote:


Jay in the Mojave wrote:


Steveo wrote:


Yeah they have a unique kinda sound..and them suckers are pretty COOL
to look at! I talk to a guy outside of Detroit from time to time that
runs an elctro-voice 640 iirc straight to a kenwood 430, and his
audio cuts right though the pile everytime. He gets tired of the
compliments with it. I dunno but I been told elctro voice is mighty
bold! hehe


Steveo:

Look at E-Bay for those mic's I seen all kinds of Electro Voice Mics
there. Or just look around, you will run one down.

Jay in the Great Mojave Desert, ....just down the road ah ways from the
fillin station.


You know i Jay, they're out there.

Scroll down and review a few here

http://www.eham.net/reviews/products/18


Hey btw I got that 520SE working, we had to replace the band-switch..I hear
that was a common problem on those rigs so no surprise. That radio is set
for a high impedance vintage studio boom mounted mic of some sort, with
those tube finals.

Tube finals into a tube amp usually makes for fairly good audio, right?


Hello Steveo:

Worked on putting up a Tower and antenna today out by Victorvile Ca, there a
bunch of guys there, got sun burned and all. But the antenna is up and humming.

Yeah that high impedance mic should work well with the that older hi Zo input.
Worth a try Id say.

I was ah thinkin about making a custom made mic head that would fit on the D-104
Mic stands, UG8 or 9 or something like that. Something that is large with ribs
or fins, like a 59 Cadalack, something out of the 1950's looking type ah thing.
Have bright LED's lights and be able to switch to a few different mic cartridges
for different sounds.

Jay in the Mojave


Hey Jay. Victorville aint what it used to be when the AirForce base was still
there. For that matter there wasn't much there when it was around hehehe



Older than the ground are you ;-}


Landshark
No but your jokes are Yoda ;)

Man, that's low from an old guy like you :-)


Weren't you down by Victorville recently for a Bronco fest or something?

See old-timers has started to set in........................That was last year, this
year it was in a place called Borengo Springs (not sure of spelling).

Landshark