About Us

October 15th 03, 12:18 AM

From: (Mati=A0R)
Greetings to all!
I am sorry for the length of the message but

please read it!

I am having some problems with my President
Lincoln (Uniden HR2510): it won't transmit!

When I press the PTT button, the TX icon

appears on the LCD, but that's all! It is still

receiving and nothing happens.
_
Did you hook it up to a meter?
What did it say? What type antenna are you using? Check your
connections, including the mic connection. Have you tried switching
mics?
_

Now the second problem: one day I turned it

on, and a horrible loud noise came from the

speaker. I turned it off immediately. Now every
time I turn the radio on, it draws as much as

2A for about a second, and then then the

current draw drops to 1,5A (still too much) and
a quiet tone can be heard. I found out that the

TDA1905 chip is getting extremely hot very

quickly - so this may be the cause of the

sound problem, and I hope that replacing the

chip will solve it. But there still is the TX

problem that I can't solve. Maybe you have

experienced something like that. Please help!

=A0=A0=A0=A0=A0=A0=A0=A0Matt )
_
I have experienced exactly what you described concerning the
non-apparent transmit,,in fact, the results were identical. Poor
solders, crimp-ons, couplers, jumpers, coax, tuner, etc., and of course,
the antenna system can duplicate this problem. Since the radio is acting
up in other ways, I'm certain one of our whiz bang techs can steer you
in the right direction.

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need help: Radio in Car .. couple of problems	D.	Equipment	0	March 28th 04 04:01 PM
FS:REPLACEMENT POWER CORDS HR2510	Kb9igg	Equipment	0	January 13th 04 02:43 PM
FS:REPLACEMENT POWER CORDS HR2510	Kb9igg	Equipment	0	January 13th 04 02:43 PM
FT-890 frequency problems	Ralph Mowery	Equipment	0	November 30th 03 10:01 PM

Menu

About Us