Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Antenna Whine?
I drive a 9900 International. I am getting a loud whine in the CB speaker,
but not in the radio speakers, even though they share the dual antennas. The whine increases and decreases with the rpms of the motor. After disconnecting the coax from the CB transceiver the whine is gone. Does this mean the coax or antennas are definitely the problem? ... or are they just picking up on a problem with the alternator? The coax will be extremely hard to replace, maybe impossible since this is a company truck. The alternator would probably be easier to repair. Any help to eliminate or even reduce the whine would be greatly appreciated. |
#2
|
|||
|
|||
"Randy" wrote:
I drive a 9900 International. I am getting a loud whine in the CB speaker, but not in the radio speakers, even though they share the dual antennas. The whine increases and decreases with the rpms of the motor. After disconnecting the coax from the CB transceiver the whine is gone. Does this mean the coax or antennas are definitely the problem? ... or are they just picking up on a problem with the alternator? The coax will be extremely hard to replace, maybe impossible since this is a company truck. The alternator would probably be easier to repair. Any help to eliminate or even reduce the whine would be greatly appreciated. Sounds like not enough ground on your antenna. How's your swr? -- http://www.allpar.com/mopar.html |
#3
|
|||
|
|||
"Steveo" wrote in message ... "Randy" wrote: I drive a 9900 International. I am getting a loud whine in the CB speaker, but not in the radio speakers, even though they share the dual antennas. The whine increases and decreases with the rpms of the motor. After disconnecting the coax from the CB transceiver the whine is gone. Does this mean the coax or antennas are definitely the problem? ... or are they just picking up on a problem with the alternator? The coax will be extremely hard to replace, maybe impossible since this is a company truck. The alternator would probably be easier to repair. Any help to eliminate or even reduce the whine would be greatly appreciated. Sounds like not enough ground on your antenna. How's your swr? -- http://www.allpar.com/mopar.html swr is ~ 3 I am just learning about CB radios. I know the antennas are using plastic inserts to keep them from being grounded. I am using Firestik II antennas and have not tried adjusting them yet. I thought I needed to eliminate the whine first. This International has a fiberglass top making for a bad ground plane, from what I have been reading. That is about all I know of my situation. |
#4
|
|||
|
|||
"Randy" wrote:
"Steveo" wrote in message ... "Randy" wrote: I drive a 9900 International. I am getting a loud whine in the CB speaker, but not in the radio speakers, even though they share the dual antennas. The whine increases and decreases with the rpms of the motor. After disconnecting the coax from the CB transceiver the whine is gone. Does this mean the coax or antennas are definitely the problem? ... or are they just picking up on a problem with the alternator? The coax will be extremely hard to replace, maybe impossible since this is a company truck. The alternator would probably be easier to repair. Any help to eliminate or even reduce the whine would be greatly appreciated. Sounds like not enough ground on your antenna. How's your swr? -- http://www.allpar.com/mopar.html swr is ~ 3 I am just learning about CB radios. I know the antennas are using plastic inserts to keep them from being grounded. I am using Firestik II antennas and have not tried adjusting them yet. I thought I needed to eliminate the whine first. This International has a fiberglass top making for a bad ground plane, from what I have been reading. That is about all I know of my situation. There's no stupid questions, Randy. The first thing to make sure of is your antenna, it's just like any other electrical connection and it has to be right. Good ground and swr and separation from the body metal just for starters. Some of that noise can be from the electric fuel pump on certain vehicles. Get your swr down to 1.5 or less for starters. You'll have to process of eliminate for any static after you know your antenna is working properly. They do sell filters for some of that noise, it goes on your hot lead. Longer is better for antenna's..you can un-screw it without getting out of the truck if you mirror mount it. -- http://www.allpar.com/mopar.html |
#5
|
|||
|
|||
"Randy" wrote in message ... "Steveo" wrote in message ... "Randy" wrote: I drive a 9900 International. I am getting a loud whine in the CB speaker, but not in the radio speakers, even though they share the dual antennas. The whine increases and decreases with the rpms of the motor. After disconnecting the coax from the CB transceiver the whine is gone. Does this mean the coax or antennas are definitely the problem? ... or are they just picking up on a problem with the alternator? The coax will be extremely hard to replace, maybe impossible since this is a company truck. The alternator would probably be easier to repair. Any help to eliminate or even reduce the whine would be greatly appreciated. Sounds like not enough ground on your antenna. How's your swr? -- http://www.allpar.com/mopar.html swr is ~ 3 I am just learning about CB radios. I know the antennas are using plastic inserts to keep them from being grounded. I am using Firestik II antennas and have not tried adjusting them yet. I thought I needed to eliminate the whine first. This International has a fiberglass top making for a bad ground plane, from what I have been reading. That is about all I know of my situation. SWR's to high. Try a "no ground" type of antenna, get the SWR down below 2 or lower would be better. Landshark -- The world is good-natured to people who are good natured. |
#6
|
|||
|
|||
In , "Randy" wrote:
I drive a 9900 International. I am getting a loud whine in the CB speaker, but not in the radio speakers, even though they share the dual antennas. The whine increases and decreases with the rpms of the motor. After disconnecting the coax from the CB transceiver the whine is gone. Does this mean the coax or antennas are definitely the problem? ... or are they just picking up on a problem with the alternator? The coax will be extremely hard to replace, maybe impossible since this is a company truck. The alternator would probably be easier to repair. Any help to eliminate or even reduce the whine would be greatly appreciated. What brand/model radio are you using? -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
#7
|
|||
|
|||
"Frank Gilliland" wrote in message ... In , "Randy" wrote: I drive a 9900 International. I am getting a loud whine in the CB speaker, but not in the radio speakers, even though they share the dual antennas. The whine increases and decreases with the rpms of the motor. After disconnecting the coax from the CB transceiver the whine is gone. Does this mean the coax or antennas are definitely the problem? ... or are they just picking up on a problem with the alternator? The coax will be extremely hard to replace, maybe impossible since this is a company truck. The alternator would probably be easier to repair. Any help to eliminate or even reduce the whine would be greatly appreciated. What brand/model radio are you using? I am using a Cobra 29 NW right out of the box. Antennas are 4' Firestiks II swr ~ 3 |
#8
|
|||
|
|||
"Randy" wrote:
I am using a Cobra 29 NW right out of the box. Antennas are 4' Firestiks II swr ~ 3 swr - 3? you got problems and dual antenna's suck. Try using just one of them. -- http://www.allpar.com/mopar.html |
#9
|
|||
|
|||
"Steveo" wrote in message ... "Randy" wrote: I am using a Cobra 29 NW right out of the box. Antennas are 4' Firestiks II swr ~ 3 swr - 3? you got problems and dual antenna's suck. Try using just one of them. -- http://www.allpar.com/mopar.html I had this same setup on another truck of the same year and model without any whine. That setup also had a fairly high swr but zero whine. Are you suggesting that because I have high swr that this is somehow allowing this whine to be picked up by the antennas? .. or maybe causing the whine? What is actually causing the whine? |
#10
|
|||
|
|||
"Randy" wrote:
"Steveo" wrote in message ... "Randy" wrote: I am using a Cobra 29 NW right out of the box. Antennas are 4' Firestiks II swr ~ 3 swr - 3? you got problems and dual antenna's suck. Try using just one of them. -- http://www.allpar.com/mopar.html I had this same setup on another truck of the same year and model without any whine. That setup also had a fairly high swr but zero whine. Are you suggesting that because I have high swr that this is somehow allowing this whine to be picked up by the antennas? .. or maybe causing the whine? What is actually causing the whine? I'm suggesting perhaps your transmitting off just your coax, with your swr being 3. Start with your antenna problems, then fix the whine. -- http://www.allpar.com/mopar.html |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
Yaesu FT-857D questions | Equipment | |||
Mobile Ant L match ? | Antenna | |||
EH Antenna Revisited | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna |