Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I have a Uniden PC122 in a '92 Nissan Sentra. When the electric fans kick
on, there is enough noise to cover up the low signals. I have tried running power from the fuse box and the battery. The power ground is only a foot long or so. The chassis is grounded next to the radio. The antenna is on the trunk and has an SWR of 1.05:1 on channel 28 and isn't higher than 1.2:1 on any channel. Transmit and receive are what they should be other than the noise. I'm thinking I should try capacitors in the fan motor? Chris |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Noise Figure Measurements | Homebrew | |||
The Apollo Hoax FAQ | General | |||
signal to noise ratio drops on connecting the antenna | Homebrew | |||
signal to noise ratio drops on connecting the antenna | Homebrew | |||
Automatic RF noise cancellation and audio noise measurement | Homebrew |