Is this a Linear Amp?
 

This amp is a piece of crap I would be embarrassed to sell this.






http://cgi.ebay.com/ws/eBayISAPI.dll...5751 954&rd=1

On Wed, 29 Jun 2005 21:30:45 -0500, "SteveJ" wrote in
:

This amp is a piece of crap I would be embarrassed to sell this.






http://cgi.ebay.com/ws/eBayISAPI.dll...5751 954&rd=1


It's not even an amp -- it's just vaporware. I wonder if Brian Griffey
is behind this.....






----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

There sure seems to be a lot of ground plane on the PCB.

Outside that it looks almost like a deadbug assembly.

If the transistors are good,it might be good for parts.

james


On Wed, 29 Jun 2005 19:49:51 -0700, Frank Gilliland
wrote:

On Wed, 29 Jun 2005 21:30:45 -0500, "SteveJ" wrote in
:

This amp is a piece of crap I would be embarrassed to sell this.






http://cgi.ebay.com/ws/eBayISAPI.dll...5751 954&rd=1


It's not even an amp -- it's just vaporware. I wonder if Brian Griffey
is behind this.....






----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

"SteveJ" wrote in message
...
This amp is a piece of crap I would be embarrassed to sell this.






http://cgi.ebay.com/ws/eBayISAPI.dll...5751 954&rd=1


Only 700 watts? Surely it can do 1500 if you feed it 15 volts!

"U-Know-Who" wrote:
"SteveJ" wrote in message
...
This amp is a piece of crap I would be embarrassed to sell this.






http://cgi.ebay.com/ws/eBayISAPI.dll...700&item=57857
51954&rd=1


Only 700 watts? Surely it can do 1500 if you feed it 15 volts!

I fed my in dash sony 18 volts and it never sounded so good for about 20
seconds or so, before I realized my voltage regulator had quit. My first
clue was how bright the gauge lights got before they started burning out.

Luckily I was only about 5 miles from home so I made it before I fried the
wiring harness and such.

Over-volt for fun! :)

Naaa, Frank.... Brians gear is already assembled.


"Frank Gilliland" wrote in message
...
On Wed, 29 Jun 2005 21:30:45 -0500, "SteveJ" wrote in
:

This amp is a piece of crap I would be embarrassed to sell this.







http://cgi.ebay.com/ws/eBayISAPI.dll...em=5785751 95
4&rd=1


It's not even an amp -- it's just vaporware. I wonder if Brian Griffey
is behind this.....






----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet
News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption
=----

On Fri, 01 Jul 2005 00:57:10 GMT, "U-Know-Who"
wrote:


"SteveJ" wrote in message
...
This amp is a piece of crap I would be embarrassed to sell this.






http://cgi.ebay.com/ws/eBayISAPI.dll...5751 954&rd=1


Only 700 watts? Surely it can do 1500 if you feed it 15 volts!

************

Nope you need 22 Volts. Got to get them pills hot before they produce.


james

"james" wrote in message
...
On Fri, 01 Jul 2005 00:57:10 GMT, "U-Know-Who"
wrote:


"SteveJ" wrote in message
...
This amp is a piece of crap I would be embarrassed to sell this.






http://cgi.ebay.com/ws/eBayISAPI.dll...5751 954&rd=1


Only 700 watts? Surely it can do 1500 if you feed it 15 volts!

************

Nope you need 22 Volts. Got to get them pills hot before they produce.


james



Ya think? Well, the heatsink is plenty large enough. With a 600 HP blower it
should be capable of handling 10K.

Doesn't look any worse than Xforce or Davemade...

Professor
Check out FlashAlert at www.telstar-electronics.com

Well... nothing wrong with this if it's sold as a prototype. The
problem is that many are pawning these off as production units. That's
not very smart for this type of RF device. Between the variation of
components... mixed with the variation of physical assembly of those
components (because of no real PCB) you can get all types of
performance and instability issues.

Professor
Check out SkyWave at www.telstar-electronics.com