Knob Help
 

I have a President Washington CB. The am, lsb, usb knob or button is
hard to turn. Their nothing wrong with the knob. Maybe only the
design. It too round and I can not get a good grip on it. Often I use a
cloth to grip it to turn.

Now, I am thinking about taking off the knob and replacing it with a
chicken head or what ever more narrow knob I would find.

I would like to know if I could simply use a small flat driver and pry
off the knob?

I hope that I do not have to open up the radio.

SR

Knob Help
 

"SR" wrote in message
...
I have a President Washington CB. The am, lsb, usb knob or button is
hard to turn. Their nothing wrong with the knob. Maybe only the
design. It too round and I can not get a good grip on it. Often I use a
cloth to grip it to turn.

Now, I am thinking about taking off the knob and replacing it with a
chicken head or what ever more narrow knob I would find.

I would like to know if I could simply use a small flat driver and pry
off the knob?

I hope that I do not have to open up the radio.

The knob may just lift off, or it may have a set screw that must be backed
off before removing the knob.

Knob Help
 

I can not pry off the knob, it's too in the radio. I am now trying to
see it I could make some kind of a small clamp that can work as a lever.
This would give me leverage to turn to the knob for ssb operations.

Any ideas?

SR

DesignGuy wrote:

"SR" wrote in message
...

I have a President Washington CB. The am, lsb, usb knob or button is
hard to turn. Their nothing wrong with the knob. Maybe only the
design. It too round and I can not get a good grip on it. Often I use a
cloth to grip it to turn.

Now, I am thinking about taking off the knob and replacing it with a
chicken head or what ever more narrow knob I would find.

I would like to know if I could simply use a small flat driver and pry
off the knob?

I hope that I do not have to open up the radio.


The knob may just lift off, or it may have a set screw that must be backed
off before removing the knob.

Knob Help
 

I remember I once had this same problem with the Cobra 148 GTL. I think
the reason why they made all of the knobs this way was because they were
probably competing with am/fm stereos radio during the disco era, that
had fine looking knobs.

Perhaps these may had been the first radios, when expensive shinny
looking machine made knobs became the new style.

When you look back to the Hammarlund, Grundig and Hallicrafters you see
a big difference in the style of knobs. Vanity vs performance!

I wonder if this was a break off from the Puritanical style, as you
would notice in furniture.

Although having a lighted red needle is very cool too!

SR



DesignGuy wrote:

"SR" wrote in message
...

I have a President Washington CB. The am, lsb, usb knob or button is
hard to turn. Their nothing wrong with the knob. Maybe only the
design. It too round and I can not get a good grip on it. Often I use a
cloth to grip it to turn.

Now, I am thinking about taking off the knob and replacing it with a
chicken head or what ever more narrow knob I would find.

I would like to know if I could simply use a small flat driver and pry
off the knob?

I hope that I do not have to open up the radio.


The knob may just lift off, or it may have a set screw that must be backed
off before removing the knob.

Knob Help
 

Oh, yeah, you gotta miss the '70's. Turnin' those shiny silver knobs
and listenin' to Electric Light Orchestra and what not.

Heck, as I recall, TV's Good Times found itself infected with the '70's
CB craze... when Michael started chatting with some paraplegic gal on
Bookman's CB radio.

Knob Help
 

On Fri, 28 Oct 2005 00:10:50 -0400, SR wrote:

I have a President Washington CB. The am, lsb, usb knob or button is
hard to turn. Their nothing wrong with the knob. Maybe only the
design. It too round and I can not get a good grip on it. Often I use a
cloth to grip it to turn.

Now, I am thinking about taking off the knob and replacing it with a
chicken head or what ever more narrow knob I would find.

I would like to know if I could simply use a small flat driver and pry
off the knob?

I hope that I do not have to open up the radio.

SR

If it doesn't pry off easily, you might want to try roughing
up the smooth knob with some large-grit sandpaper to give you a better
grip,

Knob Help
 

On Fri, 28 Oct 2005 01:06:03 -0400, SR wrote:

I can not pry off the knob, it's too in the radio. I am now trying to
see it I could make some kind of a small clamp that can work as a lever.
This would give me leverage to turn to the knob for ssb operations.

Any ideas?


File flats on either side of the knob?

SR

DesignGuy wrote:

"SR" wrote in message
...

I have a President Washington CB. The am, lsb, usb knob or button is
hard to turn. Their nothing wrong with the knob. Maybe only the
design. It too round and I can not get a good grip on it. Often I use a
cloth to grip it to turn.

Now, I am thinking about taking off the knob and replacing it with a
chicken head or what ever more narrow knob I would find.

I would like to know if I could simply use a small flat driver and pry
off the knob?

I hope that I do not have to open up the radio.


The knob may just lift off, or it may have a set screw that must be backed
off before removing the knob.

Knob Help
 

wrote in message
...
On Fri, 28 Oct 2005 00:10:50 -0400, SR wrote:

I have a President Washington CB. The am, lsb, usb knob or button is
hard to turn. Their nothing wrong with the knob. Maybe only the
design. It too round and I can not get a good grip on it. Often I use a
cloth to grip it to turn.

Now, I am thinking about taking off the knob and replacing it with a
chicken head or what ever more narrow knob I would find.

I would like to know if I could simply use a small flat driver and pry
off the knob?

I hope that I do not have to open up the radio.

SR

If it doesn't pry off easily, you might want to try roughing
up the smooth knob with some large-grit sandpaper to give you a better
grip,

After checking to see theres no fixing grub screws try biting it and pulling
it off with your teeth, that shouldnt mark the knob... careful you dont
swallow it though....... (ooh err matron ;o)
If your not bothered about the original knob pull it off with a pair of
pliers.....

Knob Help
 

On Fri, 28 Oct 2005 00:10:50 -0400, SR wrote:

I have a President Washington CB. The am, lsb, usb knob or button is
hard to turn. Their nothing wrong with the knob. Maybe only the
design. It too round and I can not get a good grip on it. Often I use a
cloth to grip it to turn.

Now, I am thinking about taking off the knob and replacing it with a
chicken head or what ever more narrow knob I would find.

I would like to know if I could simply use a small flat driver and pry
off the knob?

I hope that I do not have to open up the radio.

SR

If you want the knob off and don't care if it is damaged the safest
way to remove it without damaging the shaft is to:

Drill and tap the end of the knob and push the knob off with an added
bolt.